Key Functionality; Playback Faders - High End Systems Hog iPC Handbook

• In mouse mode, the trackball controls the main Windows cursor. The two lower
trackball buttons are used to left and right click.
• In pan & tilt mode, the trackball controls the pan and tilt of any fixtures currently
selected in the programmer. The two lower trackball buttons act as 'Next Fixture' and
'Previous Fixture' when in this mode. The pan & tilt sensitivity can be adjusted by
changing the 'trackball sensitivity' value in the Hog 2PC Control Panel.
• The top left trackball button has no function in Hog 2PC.

Key Functionality

• The majority of the keys on the Hog iPC console perform
the same function as Hog 2PC, with the exceptions
shown in the table to the right.
• Hog 2PC does not support the following keys on the
Hog iPC console:
— Scene
— Merge
— Fixture
• The Assert key is supported with Hog 2PC, and operates as follows:
— Press assert (on its own) to assert the currently chosen master.
— Hold a choose key and press assert to assert that master without choosing it.

Playback Faders

The Hog iPC console's faders are arranged in the same order as the Hog 2PC on-screen
Frontpanel:
• The first fader is the grand master and its buttons have no function.
• The GM button on the far left of the Frontpanel acts as the DBO.
• The eight faders in the middle are the 8 playback masters. Their Choose, Go, Stop and
Flash buttons are all supported.
• The last fader is the manual crossfader. Its associated buttons have no function.
• The controls for an external USB Playback Wing operate in a similar manner to the
middle eight playback faders on the Hog iPC console.
Hog iPC Handbook
Using Hog® 2PC Software
Hog iPC Console Hog 2PC
Back Pig + Next
Control
Intens
Live
Open
Positn
Undo
Group
Active
Load
Focus
45