Starting The Console; Shutting Down - High End Systems Hog iPC Handbook

System Setup

Starting the Console

After the system has been connected to AC power, check that the AC power switch on the
back panel of the console is toggled to ON.
Once the Hog iPC console boots, a startup animation will play. Two options are available
during the 10-second animation:
• Touching the screen anywhere or a left click on the mouse stops the animation and
starts the previously selected version of Hog PC software.
• A right click on the mouse stops the animation and launches the Hog iPC Configuration
Panel to allow you to choose between the Hog 3PC or Hog 2PC applications. Once
assigned, that version becomes the default until it is changed again. The following
section describes other functions included in the Hog iPC Configuration Panel.
If neither option is chosen before the animation ends, the Hog iPC console launches the
previously selected version of Hog PC and displays it's launch screen.
Note: Turning on the AC power switch will boot up the console without
having to press the computer power button
computer was shut down from the software and the AC power
switch is already on, then locate the computer power switch marked
on the console's back panel or under the wrist rest, lift the
safety cover and press to power up the console's internal computer.

Shutting Down

The best method to use for shutting down the system is through the application you are
running. The Hog iPC Configuration Panel, and both the Hog 3PC and Hog 2PC applications
have shutdown and restart options built into the user interface.
If an application is frozen, power off the console using the AC power switch on the back panel
of the console. Wait ten seconds and restore the AC power.
If the AC power switch is left on after shutting down the software, use the computer power
button to reboot the computer. Alternately, you can cycle the AC power switch off and on
to boot the Hog iPC console.
14
. However if the
Hog iPC Handbook