Restoring Default Window Positions; Keyboard Shortcuts - High End Systems Hog iPC Handbook

Using Hog® 2PC Software

Restoring Default Window Positions

If the Hog 2PC screens are in undesirable locations or missing when Hog 2PC is launched,
select the Default Positions button in the Hog iPC Configuration Panel's Start-up OS tab to
display a checkmark. This causes the Hog 2PC screens to restore factory window position
settings whenever the Hog 2PC is launched. No checkmark indicated that Default Positions
is disabled.

Keyboard Shortcuts

All of the buttons on the Hog 2PC on-screen Frontpanel (with the exception of DBO) have
keyboard shortcuts assigned to them. Most of these shortcuts are disabled by default to
prevent accidental triggering from an external keyboard. You can enable them in the Hog iPC
Configuration Panel, (see Hog iPC Console Options on page 18).
The following keyboard shortcuts are always enabled:
Q = Try Cue
NumLock = Set
F1–F10 keys = Window functions
To display the keyboard shortcut for a particular Frontpanel button, move the mouse cursor
over the button and keep it still for about half a second. A tooltip will appear to display the
keyboard shortcut for that button. This technique can also be used to display the keyboard
shortcuts for the encoder wheels. If you wish to disable the tooltips, right click on the
Frontpanel and deselect Show tooltips. You can re-enable tooltips by right clicking and
reselecting Show tooltips again.
54 Hog iPC Handbook