Timer (1); Installation - Husqvarna Automower 305 Operator's Manual

6.3 Timer (1)

The lawn should not be cut too often to obtain the best
mowing result. Consequently, it is important to limit the
operating time using the timer function if the working
area is less than the mower's working capacity. When
Automower 305 is allowed to mow too much, the lawn
®
may appear flattened. Besides, the mower is subjected
to unnecessary wear.
The timer function is also an ideal means to control
during which periods Automower
for example, when the children are playing in the
garden.
When setting the timer, calculate that the Automower
305 mows about 20 m
• Work hours 1 (2-1)
to set start and stop times for operating period 1.
Enter each required time in hours and minutes
and press OK to confirm the entered time.
• Work hours 2 (2-2)
to set start and stop times for operating period 2.
Enter each required time in hours and minutes
and press OK to confirm the entered time.
Bypass timer (2-1)
• Work days (2-3)
to select the days the mower must work.
Automower 305 will work during the days that
®
are ticked off.
• Reset timer (2-4)
to close all timers and reset values to the factory
settings.

6.4 Installation (2)

The following operating settings are available via this
selection in the main menu.
• Corridor width (2-1)
to select the distance from the guide wire the
mower is allowed to travel when it follows this to
and from the charging station.
• Remote start (2-2)
to control the mower so that it can easier reach
remote parts of the garden.
• Test settings (2-3)
to check the above settings.
For examples of garden settings, see 7. Garden
example
38 - English
6. MENU FUNCTIONS
305 should not mow,
®
2 per hour and day.
®
Timer
Installation
Security
Inställningar
Timer
Installation
Security
Settings
Work hours 1
Work hours 2
Veckotimer
Reset timer
Corridor width
Remote start
Test settings