Replacing The Blades - Husqvarna Automower 305 Operator's Manual

8.8 Replacing the blades

WARNING
Always use originalblades and
screws when replacing.
Only replacing the blades and
reusing the screw can result in the
screw wearing during mowing and
shearing off. The blades can then be
thrown out and cause serious injury.
There are three blades on Automower
screwed into the blade disc. All three blades and
screws must be replaced at the same time to obtain a
balanced mowing system.
There are several different types of mower blades to
choose from as accessories, with different features.
Use Husqvarna AB approved blades only. Please
contact your dealer for more information.
To replace the blades:
1. Set the main switch to the 0 position.
2. Wear protective gloves.
3. Turn Automower
4. Remove the screw. Use a straight slot or
cross-tip screwdriver.
5. Remove the blade and the screw.
6. Screw on the new blade and the new screw.
50 - English
8. MAINTENANCE
305, which are
®
® 305 upside down.