Automower ® Connect Menu; Settings In Automower ® Connect; Timer Settings - Husqvarna AUTOMOWER 550H Operator's Manual

• Get extended product information.
• Get an alarm if the product moves out of the
work area.
Note: All countries do not support Automower
Connect because of regional specified cellular
systems.
®
The Automower Connect app is preferable if
you have one or few products installed. For users
with several products we recommend you to use
Husqvarna Fleet Services
™
Fleet Services on page 29 .
3.10.1 To install Automower
1. Download the Automower
your mobile device.
2. Sign up for a Husqvarna account in the
®
Automower Connect app.
3. Log in to your Husqvarna account in the
®
Automower Connect app.
3.10.2 To pair Automower
the product
To start the product for the
1. Do step 1-7 in
first time on page 21 .
2. Obey the instructions in the Automower
Connect app.
®
3.11 Automower Connect menu
The main menu in Automower
options:
Dashboard
•
Map
•
• Settings
Messages (only available for Bluetooth
•
short-range connectivity)
3.11.1 Dashboard
The dashboard shows the current status of the
product both visually and in text. It is very easy to
control the product by tapping the controls, for
Park .
example
In the lower part of the dashboard there are
Timer settings and the Map . The
shortcuts to the
dashboard also shows symbols according to
below:
1. The battery status shows the remaining
battery charge. A flash is shown over the
22 - Installation
®
™ Husqvarna
. Refer to
®
Connect
®
Connect app on
®
Connect and
®
®
Connect offers 4
battery symbol when the product charges its
battery. A plug is shown over the battery
symbol when the product is standing in the
charging station without charging.
2. Cutting height.
For more information about the operating modes
Start, Park and Pause , see Operation on page
30 .
3.11.2 Map
The map shows the current position of the
product and the set centerpoint (origin) for
GeoFence.
3.11.2.1 Map settings
Map in the main menu.
1. Open
2. Tap the settings symbol down to the right.
Movement path .
3. Enable/disable
GeoFence radius .
4. Enable/disable
Map view or Satellite view .
5. Choose
3.12 Settings in Automower
The product has factory settings but
the settings can be adapted to each
work area.
The settings that can be changed are
described in each of the Settings
chapters.

3.13 Timer settings

The timer function controls which
periods the product operates.
®
Connect
1102 - 002 -