Presentation - Husqvarna Automower 305 Operator's Manual

2. Presentation

This chapter contains information that is important to
be aware of when planning the installation.
An installation of Husqvarna Automower
four main components:
• Automower ® 305, an robotic lawn mower that
mows the lawn by moving in essentially an
irregular pattern. The mower is powered by a
maintenance-free battery.
• Charging station, where your Automower
returns when the charge level in the battery
becomes too low.
The charging station has three functions:
• To send control signals along the boundary
wire.
• Sending control signals in the guide wire so
that Automower
station.
• To charge Automower
• Transformer, which is connected between the
charging station and a 230V wall socket. The
transformer is connected to the wall socket and
to the charging station using a 10 m long low
voltage cable. The low voltage cable must not be
shortened nor extended. A longer low voltage
cable is available as option. Please contact your
dealer for more information.
• Wire, laid in a loop around Automower
working area. The boundary wire is laid around
the edges of the lawn and around objects and
plants that the mower must not run into. The wire
is also used as the guide wire.
The wire supplied with the installation is 150 m
long. If this is not sufficient more wire can be
purchased, with a connector, and spliced onto
the existing wire.
10 - English
2. PRESENTATION
® 305 includes
®
® 305 can find the charging
® 305 battery.
305
®
305