Part 6 Function And Control; Remote Control Operations - Gree GWH09MA-K3NNA3F Service Manual

6. Function and Control

6.1 Remote Control Operations

YB1FA
1
4
5
9
10
12
1
ON/OFF :
Press this button to start the unit operation .Press this button again to stop the unit operation.
2 MODE :
Each time you press this button,a mode is selected in a sequence that goes from AUTO,COOL,DRY, FAN,and HEAT
as the following:
*Note:Only for models with heating function.
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the LCD, and
the unit will automatically select the suitable operation mode in accordance with the room temp erature to make indoor
room comfortable.
+
:
3
Press this button to increase set temperature.Holding it down above 2 seconds rapidly increases set temperature. In AUTO
mode,set temperature is not adjustable.
4
Press this button to decrease set temperature.Holding it down above 2 seconds rapidly decreases set temperature. In AUTO
18
2
3
6
7
8
11
13
14
FAN
AUTO COOL DRY
.
ON/OFF
1
Press it to start or stop operation
MODE
2
Press it to select operation mode(AUTO/COOL/DRY/FAN/HEAT)
3
+
: Press it to increase temperature setting
4
- : Press it to decrease temperature setting
5 FAN
Press it to set fan speed
6
Press it to set swing angle
TIMER ON
7
Press it to set auto-on timer
8
TIMER OFF
Press it to set auto-off timer
CLOCK
9
Press it to set clock
X-FAN(
10 X-FAN is the alternative expression of BLOW for the purpose of
understanding.)
TEMP
11
TURBO
12
SLEEP
13
LIGHT
14
Press it to turn on/off the light.
*
HEAT
Function and Control
,
*