Function And Control; Remote Controller Introduction Of Yaa1Fb16(Wifi) - Gree GWH09AOCXD-K6DNA1B Service Manual

6. Function and Control

Service Manual

6.1 Remote Controller Introduction of YAA1FB16(WiFi)

Buttons on remote controller
Introduction for buttons on remote controller
1. ON/OFF button
● Press this button to turn on/off the air conditioner.
● When turning on/off, clear off the original timer and sleep setting.
2. MODE button
● Press this button, the circulation mode will change as the fig is
shown:
Tip: Cooling only type does not receive heating mode signal.
Temperature can't be adjusted under auto mode.
3. WiFi button
● Press " WiFi " button to turn on WiFi function, "WiFi " icon will be
displayed on the remote controller; Hold " WiFi " button for 5s to
turn off WiFi function and " WiFi " icon will disappear. Under off
status, press "MODE" and " WiFi " buttons simultaneously for 1s,
WiFi module will restore factory settings.
● This function is only available for some models.
4. +/- button
● For every press of "-" or "+" button, the set temperature will
decrease or increase 1°C. Press "-" or "+" button for over 1
second, the temperature value will be changed quickly and the
information will be sent until the button is loose.
● Press "-" and "+" button at the same time for 3 seconds to lock
or unlock the keyboard, after locking, the remote controller will
display the lock icon " ", at this moment, touch either button, the
lock icon will blink three times and the status is unchanged. After
unlocking the keyboard, the lock icon of displayer will disappear.
Technical Information
5. LIGHT button
● Press this button to control the LED status on the displayer, the
circulation change is as follow:
6. COOL button
● Press this button, the air conditioner will conduct cooling mode.
Hold "cool" button under cooling mode for 5s to turn on or turn off
the cool function; once this function is turned on, "cool icon" and
"COOL" will be displayed on the remote controller.
7. HEAT button
● Press this button, the air conditioner will conduct heating mode.
8. button
● Press this button to start (display "
display " " icon) left and right swing function.
Remark: according to the comfort demand of air supply, the swing
range under different modes is different.
9. button
● Press this button to start (display "
display " " icon) up and down swing function.
Remark: according to the comfort demand of air supply, the swing
range under different modes is different.
10. TIMER button
● Press this button to set timer ON/OFF.
● Press this button, the character of H and OFF (ON) will blink. At
" icon) or shut down (no
" icon) or shut down (no
13