Installation Manual
Photos
Operating Process
5. Insert quick connector(male) into root of the
female one, and reposit tightening noose at the
same time.
Note: Make orientating pin downward.
6. Rotate tighten plate andpress it to bottom.
Note: It is hard to press tighten plate to bottom
if tighten noose doesn't reposited thoroughly.
Tighten plate
7.Connect the wiring terminal.fix the
earthing wiring with screw to the
metal electric box.Install wire clamp
to tighten connection wire.
Wire clamp
Connection terminal
8. Install big handle.
36