Gree GWH09MA-K3NNA3F Service Manual page 76

Removal Procedure
Remove magnetic coil
Remove the screw of the magnetic
coil. Remove the magnetic coil.
13. Remove valve support subassembly
Loosen the 2 bolts fixing the quick
coupler. Solder off the quick connector,
return air pipe and connecting pipe
(capillary). Remove the valve support.
(Note: discharge the refrigerant before
soldering. Wrap the quick coupler with
wet cloth to avoid damage from high
temperature.)
Remove compressor
Discharge the refrigerant. Solder off
a
the pipe connecting the compressor
(including 4-way valve, compressor,
condenser, capillary.) Do not block
the capillary during soldering.
Loosen the ground bolts fixing the
b
compressor.
compressor.
Then remove the
magnetic coil
4-way valve
valve support
capillary
compressor
73