Table of Contents
Advertisement
Easy-teach digital fiber amplifier
E3X-SD
The E3X-SD easy-teach fiber amplifier is the ideal solution for
all standard fiber applications. The one-button teaching and/
or the simple threshold adjustment with up/down keys and the
easy to read display allow an intuitive usage and fast set up.
• easy one-button teaching
• easy to read display and simple threshold adjustment with
up/ down keys for intuitive usage
• GIGA RAY LED for high performance and precision
Ordering Information
Shape
*1.
Order connector separately. For M8 connector models see E3X-DA-S.
Amplifier Unit Connectors (sold separately)
Shape
Type
Fiber amplifier
connector
*1.
4-wire version. For 3-wire version order E3X-CN11.
Note: Stickers for Connectors are included as accessories.
Accessories (sold separately)
Mounting Brackets
Appearance
Model
E39-L143
E3X-SD
Item
Pre-wired
*1
Fiber amplifier connector
Comment
2 m PVC cable
30 cm PVC cable with M12 plug connector (4 pin)
30 cm PVC cable with M8 plug connector (4 pin)
Quantity
1
Order code
NPN output
E3X-SD21 2M
E3X-SD7
End Plate
Appearance
PNP output
E3X-SD51 2M
E3X-SD9
Order code
*1
E3X-CN21
E3X-CN21-M1J 0.3M
E3X-CN21-M3J-2 0.3M
Model
Quantity
PFP-M
1
1
Advertisement
Table of Contents
Related Manuals for Omron E3X-SD
Summary of Contents for Omron E3X-SD
-
Page 1: Ordering Information
The one-button teaching and/ or the simple threshold adjustment with up/down keys and the easy to read display allow an intuitive usage and fast set up. • easy one-button teaching • easy to read display and simple threshold adjustment with up/ down keys for intuitive usage •... -
Page 2: Ratings And Specifications
Current consumption Current consumption: 40 mA max.) (Power supply voltage: 12 V, Current consumption: 80 mA max.) Open-collector output (NPN or PNP) Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1.5 V max.) Control output Light-ON/Dark-ON mode selector Operate or reset: 200 s max. -
Page 3: Output Circuit
(L-ON) electric Output transistor 12 to Sensor 24 VDC Control output Operate main Load circuit (e.g., relay) Reset (Between brown and black leads) E3X- Blue Out- SD21 E3X-SD7 Incident light No incident light Operation indicator DARK ON (orange) Dark-ON (D-ON) -
Page 4: Safety Precautions
The E3X-MC11 Mobile Console (sold sep- arately) cannot be used. If an excessive amount of light is received via the Sensor, the mu- tual interference prevention function may not work. In this case, Do not use an AC power supply. - Page 5 Be sure to lock or unlock the lock lever within an ambient temper- neath the clip. ature range between 10C and 40C. 1. Insert the clip to be removed into the slit underneath the clip on Operating Environment another Amplifier Unit.
- Page 6 Mounting Holes SUS304 stainless steel (sold separately) Two, M3 22.4 Fiber Attachment mounted (E39-F9) Note: When using E39-L143 Mounting Brackets, there will be small gaps between the Amplifier Units if they are mounted side by side. Easy teach fiber amplifier...
- Page 7 ✽ Cable Diameters E3X-CN11 (3 conductors) 4.0 dia. E3X-CN12 (1 conductor) 2.6 dia. 22.4 Fiber Attachment mounted (E39-F9) Note: When using E39-L143 Mounting Brackets, there will be small gaps between the Amplifier Units if they are mounted side by side. E3X-SD...
-
Page 8: Accessories (Sold Separately)
2,000 Edge of amplifier E3X-CN11 ✽ ✽ E3X-CN11: 4 dia. 4 dia. cable / 3 conductors 3 conductors / Standard length: 2 m (Conductor cross section: 0.2 mm (AWG24), Insulator diameter: 1.1 mm) Slave Connector 2,000 E3X-CN12 Edge of amplifier ✽... -
Page 9: Operating Procedure
Sensitivity Setting Changes within a time are detected, and the operating level is set The sensitivity can be set with the UP and DOWN Keys similar to to the midpoint between the maximum and the minimum values using an adjuster knob. The sensitivity can also be easily set by of the changes. - Page 10 This is not intended to be an exhaustive list producing this document in any manner, for any other purpose. If of all possible uses of the products, nor is it intended to imply that the copying or transmitting this document to another, please copy or uses listed may be suitable for the products: transmit it in its entirety.
- Page 11 E3X-SD...
- Page 12 Cat. No. E67E-EN-01 In the interest of product improvement, specifications are subject to change without notice. OMRON EUROPE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands Phone: +31 23 568 13 00 Fax: +31 23 568 13 88 www.industrial.omron.eu Easy teach fiber amplifier...