Operations After Using Copy Functions
1
When your copy operations are completed, press
control panel.
The screen for entering the Department ID and Password appears.
NOTE
•
To perform copy operations again, enter the Department ID and Password.
•
If you do not press
totaled under the Department ID which you previously entered.
•
When copy operations have been completed, the screen for entering the Department ID and
Password automatically appears, after the set time has elapsed, even if you forget to press
(ID). (See 'Setting the Time Taken for the Display to Return to the Basic Features Screen
After Finishing Operations,' on p. 3-35.)
(ID) after finishing your copy operations, any subsequent copies will be
Entering the Department ID and Password
(ID) on the
1
1-39