Canon imageRUNNER 3300 Reference Manual page 81

2
Adjust the slide guides to the size of the paper.
When feeding large-size paper, pull out the auxiliary tray.
3
Load the paper in the stack bypass.
Make sure that the height of the paper stack does not exceed the limit mark (
Align the required number of sheets of paper with the slide guides. The surface that you
want to print on must be placed face up. Insert the paper into the machine until it stops.
IMPORTANT
•
If Stack Bypass Standard Settings are set to 'On,' you can load only the registered paper
types in the stack bypass.
Slide Guide
Auxiliary tray
Making Prints Using the Stack Bypass
1
).
1-49