Canon imageRUNNER 3300 Reference Manual page 80

s Free Size
You can place non-standard size paper (4" x 5-1/2" to 11-3/4" x 17" (100mm x 139mm to
297mm x 432mm)).
s Envelope
The following envelopes can be loaded into the envelope cassette: COM10, ISO-B5,
Monarch, ISO-C5, DL, and Yougata 4.
1
1
1-48 Making Prints Using the Stack Bypass
Open the stack bypass.
q If the specified paper has already been loaded in the Stack Bypass:
Press "Paper Select," and press "Stack Bypass" to specify the loaded paper.
Proceed to Step 6.
NOTE
•
If the paper size loaded in the stack bypass is different from the paper size stored in the
Standard Stack Bypass Settings, set the Stack Bypass Standard Settings to "Off." (See
'Setting the Standard Paper for the Stack Bypass,' on p. 3-24.)
q If paper different from that specified is loaded in the Stack Bypass:
Check to see if any job is reserved. (See 'Flow of Checking/Changing Operations,'
on p. 2-2.)
If there is a current/reserved job, reserve a change for the stack bypass. (See 'Using the
Stack Bypass While Reserving Print Jobs,' on p. 1-55.)
When there is no reserved job, remove the paper and continue the procedure from step 2.