Canon imageRUNNER 3300 Reference Manual page 75

The surface that you want to scan into memory must be placed face down. Align the corner
of the original with the top left corner (the arrow) of the platen glass.
Place books and other bound originals on the platen glass in the same way.
When enlarging LTR or STMT-size originals to 11" x 17" or LGL-size paper, place the
original horizontally on the platen glass, and align it with the LTRR or STMTR marks.
NOTE
•
When copying STMT-size originals using the platen glass, you need to set "LTRR/STMT
Original Selection" in Additional Functions. (See 'Distinguishing LTRR-size and STMT-size
Originals,' on p. 3-19.)
3
Gently lower the feeder/platen glass cover.
CAUTION
•
Close the feeder/platen glass cover gently, to avoid catching your hand, as this may
result in personal injury.
•
Do not press down the feeder/platen glass cover with force when scanning thick
books. This may damage the platen glass and cause personal injury.
IMPORTANT
•
When placing originals on the platen glass, the size of the original is detected after the
feeder/platen glass cover has been lowered. Be sure to lower the feeder/platen glass cover
before copying.
Placing Originals 1-43
1