Canon imageRUNNER 3300 Reference Manual page 133

1
Call up the desired screen as follows:
(Additional Functions)
2
Select the functions of dedicated output trays A, B, and C, and press
"OK."
When the Saddle Finisher-G1 is
attached
"Fax" is displayed when the Fax board is attached.
IMPORTANT
•
When the paper reaches the stacking limit of the tray while Trays A, B, and C are set as the
designated tray for a certain function, the machine automatically changes the output tray to
another available tray. However, it is recommended that a single output tray should be
assigned to received fax documents to prevent them from being lost.
NOTE
•
Prints of the Mail Box and Report modes are output as "Other."
•
In the case that the Saddle Finisher-G1 is not attached, Tray C can only be assigned to a
single function, which no other tray is assigned to.
•
When the Saddle Finisher-G1 is attached, the print is output to Tray B, regardless of the
dedicated tray setting if transparency, envelope, heavyweight paper, tracing paper, or free size
paper is selected.
•
When the Saddle Finisher-G1 is attached, the print is output to Tray A regardless of the
dedicated tray setting if the Staple mode is set.
•
When the Inner 2way Tray-A1 is attached, the print is output to Tray A regardless of the
dedicated tray setting, if Transparency, Envelope, Heavyweight paper, Tracing paper, or Free
size paper is selected.
3
Press "Done."
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting Specifications That Are Common to Each Function (Common Settings)
Tray Designation
When the Inner 2way Tray-A1 is
attached
3
3-21