Changing The Password And Impression Limit - Canon imageRUNNER 3300 Reference Manual

12
Press "Done."
Repeat this procedure.
The screen below appears.
NOTE
•
For details of how to enter the Department ID and Password, see 'Entering the Department ID
and Password,' on p. 1-37.

Changing the Password and Impression Limit

The following instructions describe how to change the Password and Impression Limit you
have stored.
1
Call up the desired screen as follows:
(Additional Functions)
When the System Manager ID/Password is set, enter the System Manager ID and System
Password after pressing "System Settings." Then, press
2
Press "On," and press "Store Dept. ID/Password."
(ID).
Setting the Department ID Management
4
4-11