Canon imageRUNNER 3300 Reference Manual page 297

NOTE
•
Copies are stapled in the following places:
- When an original is placed on the platen glass:
Corner staple area
- When originals are placed in the feeder:
Corner staple area
•
If the number of sheets in one set exceeds 25 (for 11" x 17" and LGL size) or 50 (for LTR and LTRR
size), stapling will not be performed. Only Collating will be performed.
•
If the machine stops during stapling and <Load staples> is displayed, it means that almost all of the
staples have been used up and the staple case must be replaced. To proceed, replace the staple
case. (See 'Replacing the Staple Case in the Stapler Unit,' on p. 7-63.)
Double staple area
Double staple area
Saddle Finisher-G1/Puncher Unit-K1
7
7-49