To Configure A Standalone Server For The First Time; Clearing Your Configuration; To Clear The Configuration And Start Again - Sun Microsystems Fire V250 Installation Manual

To Configure a Standalone Server for the First
Time
1. Specify the type of terminal you are using to communicate with the server.
2. When prompted to indicate whether you want the server to be networked, type
No.
3. Specify a Host Name for the server.
4. Confirm the information you have given.
5. Specify the date and time information.
6. When prompted, give a password (if needed) for users logging in as root.

Clearing Your Configuration

If you want to start the power on process again, as if from a previously unused
server, you must clear the configuration of the server.

To Clear the Configuration and Start Again

1. At the Solaris prompt, type:
# sys-unconfig
2. When prompted for confirmation to create a "blank" server, type y.
3. When the OpenBoot PROM prompt appears, type:
ok> boot
4. Follow the instructions in one of the following sections:
"To Configure With the Server's Details Registered at a Name Server" on page 29
or
"To Configure Without the Server's Details Registered at a Name Server" on
page 30
"To Configure a Standalone Server for the First Time" on page 31
Chapter 4 Powering On and Configuring the Server 31