Table of Contents
Advertisement
Others
Error Displays and Actions
Alarm displays on the LCD monitor and viewfinder screens, as well as the tally lamps and alarm sounds are output as follows
according to the alarm status.
Memo :
● This camera recorder makes use of a microcomputer. Noise interference from external sources may prevent it from functioning
properly. When this occurs, turn off and on the power of the camera recorder again.
Error Display
Menu/Thumbnail
Status Screen
TURN POWER OFF
TURN BACK ON
LATER
INCORRECT MEDIA
Incorrect Media [***]
[***]
INVALID MEDIA
Invalid Media [***]
[***]
FORMATTING
Formatting Required
REQUIRED
[***]
RESTORE MEDIA
Restore Media [***]
[***]
NO MEDIA
^
^
NO CLIP
REC INHIBITED
CLOSE SLOT
COVER
LOST MEDIA INFO
Lost Media Info [*]
[*]
Screen
^
System error.
* The alarm sounds and the tally lamp blinks
about once every second.
SDHC card is not supported (a type other than
Class 6).
(***: A, B, A/B)
● An irrecoverable error is detected.
● SDHC card reading/writing error. (Faulty
SDHC card)
(***: A, B, A/B)
SDHC card is not formatted using this camera
[***]
recorder.
(***: A, B, A/B)
● SDHC card requires restoring.
● Recording is not successfully completed.
(Temporary blackout/card removed)
(***: A, B, A/B)
^
[REC] button is pressed when an SDHC card
is not inserted.
No Media
No SDHC card is found in Media mode or
when the thumbnail screen is displayed.
No Clips
No clips are found on the inserted SDHC card
in Media mode or when the thumbnail screen
is displayed.
^
No viewable clips are found on the card for
Clip Review.
^
[REC] button is pressed when the write-protect
switch of the SDHC card is set.
● Recording to the SDHC card is started with
^
the cover of the selected slot left open.
● The cover is opened while recording is in
progress.
● Card is removed while recording is in
progress.
● Card is removed while formatting is in
progress.
● Card is removed while restoring is in
progress.
● Card is removed while adding the OK mark.
● Card is removed while writing a setup file.
● Card is removed while deleting a clip.
(*: A, B)
Status
Action
Turn off the power, and turn it on again.
If the error persists, consult your nearest JVC
dealer.
Insert an SDHC card that is Class 6 compliant.
(A Page 31)
Replace the SDHC card with a new one.
Format the card using this camera recorder.
(A Page 32)
Restore the card using this camera recorder.
(A Page 33)
Insert an SDHC card. (A Page 31)
Insert an SDHC card. (A Page 31)
Insert an SDHC card that contains playable
clips. (A Page 31), (A Page 57)
Insert an SDHC card that contains clips that
can be reviewed. (A Page 31), (A Page 52)
Turn off the write-protect switch of the SDHC
card, or insert a recordable SDHC card.
(A Page 33)
Close the cover of the SDHC card slot.
(A Page 31)
Restore the card using this camera recorder.
(A Page 33)
Advertisement
Table of Contents
