Initializing The Xscf Unit - Oracle SPARC Enterprise M4000 Installation Manual

Note – If Step 10 is not performed within 1 minute the login certification will expire.
12. Confirm that the XSCF Shell prompt is displayed on the administration console.
XSCF>
3.3.2

Initializing the XSCF Unit

To use full XSCF functionality, various settings need to be set.
1. Set the required settings.
See section "Setting up XSCF" in the SPARC Enterprise
M/3000/4000/M5000/M8000/M9000 Servers XSCF User's Guide for details on how to set
these settings.
The following settings are required:
Registration of an XSCF user account and password and user privileges (adduser,
■
password, setprivileges)
User account of a field engineer (FE) (for maintenance)
■
Date and time settings (setdate, settimezone)
■
Confirmation of XSCF host public key (showssh)
■
SSH/telnet settings (setssh, settelnet)
■
Network interface, routing, and DNS-related settings (setnetwork, setroute,
■
setnameserver, etc.)
Note – Reset the XSCF with the applynetwork and rebootxscf commands.
Domain to Service Processor Communications Protocol (DSCP) configuration
■
(setdscp)
Altitude setting (setaltitude)
■
Note – setaltitude must be followed by a rebootxscf to apply the altitude
setting
Dual power feed option setting (setdualpowerfeed)
■
Chapter 3 Installing the Server 3-9