Using The Showlogs Command; Section B.2.2, "Using The Showlogs Command - Oracle SPARC Enterprise M4000 Installation Manual

B.2.2

Using the showlogs Command

The showlogs command displays the contents of a specified log in order of
timestamp starting with the oldest date. The showlogs command displays the
following logs:
error log
■
power log
■
event log
■
temperature and humidity record
■
monitoring message log
■
console message log
■
panic message log
■
IPL message log
■
An example of the showlogs output.
XSCF> showlogs error
Date: Oct 03 13:53:05 UTC 2006
Status: Information
FRU: ,/XSCFU
Msg: XSCF process down detected
Date: Oct 03 13:53:05 UTC 2006
Status: Information
FRU: ,/XSCFU
Msg: XSCF process down detected
Date: Oct 03 14:36:58 UTC 2006
Status: Information
FRU: ,/XSCFU
Msg: XSCF process down detected
Date: Oct 03 17:23:11 UTC 2006
Status: Alarm
FRU: /FAN_A#0
Msg: Abnormal FAN rotation speed. Insufficient rotation
XSCF>
Code: 40000000-faffc201-011d000100000000
Occurred: Oct 03 13:53:04.742 UTC 2006
Code: 40000000-faffc201-011d000100000000
Occurred: Oct 03 13:53:05.880 UTC 2006
Code: 40000000-faffc201-011d000100000000
Occurred: Oct 03 14:36:57.777 UTC 2006
Code: 80002000-ccff0000-0104340100000000
Occurred: Oct 03 17:23:10.868 UTC 2006
Appendix B Fault Isolation B-5