Oracle SPARC Enterprise M4000 Installation Manual page 40

The show-devs command command output continued..
/pci@40,600000/pci@0/pci@8/pci@0/scsi@1
/pci@40,600000/pci@0/pci@8/pci@0/scsi@1/disk
/pci@40,600000/pci@0/pci@8/pci@0/scsi@1/tape
/pci@48,4000/ebus@1
/pci@48,4000/ebus@1/panel@14,280030
/pci@48,4000/ebus@1/scfc@14,200000
/pci@48,4000/ebus@1/serial@14,400000
/pci@48,4000/ebus@1/flashprom@10,0
/cmp@480,0/core@1
/cmp@480,0/core@0
/cmp@480,0/core@1/cpu@1
/cmp@480,0/core@1/cpu@0
/cmp@480,0/core@0/cpu@1
/cmp@480,0/core@0/cpu@0
/openprom/client-services
/packages/obp-tftp
/packages/terminal-emulator
/packages/disk-label
/packages/deblocker
/packages/SUNW,builtin-drivers
ok
6. Compare the configuration shown by showhardconf -u, probe-scsi-all,
and show-devs with the shipping list.
If the configuration is incorrect contact your sales representative.
7. Boot the Oracle Solaris operating system (Oracle Solaris OS) and configure the
domains.
Refer to the Oracle Solaris software documentation for details.
3-14 SPARC Enterprise M4000/M5000 Servers Installation Guide • February 2012