Ganz ZC-PT Series User Manual page 54

User's Manual
•
•
•
•
•
•
53
SCHEDULE SWITCH
Select <ON> to enable or <OFF> to disable the schedule function.
SCHEDULE POINT
Users are allowed to arrange 32 sets of schedule point, i.e. each set of
schedule point can be assigned one kind of schedule modes.
SCHEDULE HOUR / MINUTE
The items are for setting up the time to execute each schedule point.
SCHEDULE MODE
This is for setting the schedule function of the selected schedule point; the
options are listed as follows.
NONE
No action will be executed for the schedule if select the item.
PRESET
Users can select the PRESET mode as an action carried out in a schedule
point.
SEQUENCE
Users can select the SEQUENCE mode as an action carried out in a
schedule point.
AUTOPAN
Users can select the AUTOPAN mode as an action carried out in a schedule
point.
CRUISE
Users can select the CRUISE mode as an action carried out in a schedule
point.
IR FUNC. (IR Function)
If select the IR function mode, the AUTO IR FUNCTION will be activated for a
schedule point.
SCHEDULE RESET
Users can reset the whole schedule with the item
SCHEDULE EXIT
Exit the SCHEDULE menu and go back to the MAIN PAGE 3.
.