Ganz ZC-PT Series User Manual page 44

User's Manual
with an alarm system to capture images of a particular event. For wiring details,
please refer to the installation guide and/or qualified service personnel. Adjustable
alarm parameters are listed below.
ALARM PIN
ALARM SWITCH
ALARM TYPE
ALARM ACTION
PRESET POINT
DWELL TIME
EXIT
•
•
•
•
43
ALARM SETTING
1
OFF
N.C.
PRESET
001
ALWAYS
YES
ALARM PIN
The PTZ Camera provides eight alarm inputs and one output (N.O. or N.C).
Select an alarm connection for which you want to use this option to set
alarm-related parameters and then set those parameters in the Alarm Setting
menu. For alarm pin definitions, refer to section 2.6 22-Pin Connector
Definition or the installation guide.
ALARM SWITCH
This option is used to enable or disable the selected alarm pin function. Use
the left/right direction keys on the control keyboard to change the setting.
ALARM TYPE
There are two alarm types: Normally open and Normally closed, which are
illustrated below. Select an alarm type that corresponds to the alarm
application.
ALARM ACTION
The alarm actions include PRESET, SEQUENCE, AUTOPAN and CRUISE
functions. Select one of these modes so that certain action will be executed
when an alarm is triggered. Use the right direction key of the control keyboard
to select a particular action mode, and the items listed below will change in
accordance with your selected alarm action.