Ganz ZC-PT Series User Manual page 37

•
SEQUENCE POINT
Up to 32 points can be specified for each sequence line. The sequence points
represent the order of the preset points that the PTZ Camera will automatically
run. The following setup items, including PRESET POSITION, SPEED and
DWELL TIME, will influence how the camera runs through each sequence
point.
•
PRESET POSITION
The user can assign a specific preset position to the selected sequence point
with this item.
•
SPEED
Users can set the speed of one sequence point to the next one, and the
range of setup speed is from 1 to 15. Within the range, PAN speed varies
from 10 ~ 400 (degree/sec.), and TILT speed varies from 8 ~ 400
(degree/sec.).
•
DWELL TIME
The DWELL TIME is the duration time that the PTZ Camera will stay at a
sequence point, and the range is from <0> to <127> seconds. The PTZ
Camera will go to the next sequence point when the DWELL TIME expires. If
the setting is <0>, the PTZ Camera will stay at the sequence point until users
manually move the camera.
•
RUN SEQUENCE
The user can command the PTZ Camera to run the selected sequence line
manually. Press <ENTER> to execute a sequence line.
•
EXIT
Select this option to exit the SEQUENCE menu; go back to the MAIN PAGE 2
to carry on setup of auto-pan.
MAIN PAGE 2
ID DISPLAY
TITLE DISPLAY
TITLE SETTING
PRESET
SEQUENCE
AUTOPAN
CRUISE
HOME SETTING
Users could execute the sequence function through the control
keyboard. Please refer to its user manual for further information.
ON
OFF
01
ENTER
ENTER
ENTER
ENTER
ENTER
User's Manual
36