Ganz ZC-PT Series User Manual page 45

•
PRESET POINT
Select a preset point where the camera should go when an alarm pin is
triggered. The preset point(s) should be set prior either in the PRESET setup
menu or through the keyboard.
SEQUENCE LINE
Select a sequence line that the PTZ Camera should execute when an alarm
pin is triggered. The sequence line(s) should be defined prior either in the
SEQUENCE setup menu or through the keyboard.
AUTOPAN LINE
Select an auto-pan line that the camera should execute when an alarm pin is
triggered. The auto-pan line(s) should be defined prior either in the
AUTOPAN setup menu or through the keyboard.
CRUISE LINE
Select a cruise line that the camera should execute when an alarm pin
is triggered. The cruise line should be defined prior either in the
CRUISE setup menu or through the keyboard.
•
DWELL TIME
The DWELL TIME is duration of executing an alarm action. If select the
PRESET mode, when alarm takes place, the camera will go to the selected
preset position and stay there for a user-defined period of time
(1~127seconds/Always). If select other modes (SEQUENCE/AUTOPAN/
CRUISE), the camera will keep executing the selected mode (DWELL TIME:
ALWAYS) until alarm condition is released or users rotate the dome.
NOTE: The dwell time is only adjustable when selecting Preset as
the alarm action.
•
EXIT
Exit the ALARM SETTING menu and go back to the MAIN PAGE 3 to carry
on setup of alarm detect (18×/26× model only).
18×/26× Model:
MAIN PAGE 3
IR FUNCTION
ALARM SETTING
ALARM DETECT
PRIVACY MASK
TIME SETTING
SCHEDULE
EXIT OSD
AUTO
ENTER
ENTER
ENTER
ENTER
ENTER
YES
User's Manual
44