Ganz ZC-PT Series User Manual page 50

User's Manual
•
•
23×/35× Model:
PRIVACY SWITCH
SHADE
SET MASK
CLEAR MASK
MASK DISPLAY
EXIT
•
49
H SIZE (00~80)
Users can adjust the horizontal size of a privacy mask through this item. Set
the H and V size to 0 can also delete the selected mask.
V SIZE (00~60)
Users can adjust the vertical size of a privacy mask through this item. Set the
H and V size to 0 can also delete the selected mask.
CLEAR MASK
Users can delete a preset mask zone with this item. Please follow the steps
listed below.
1. Select the mask zone that will be erased (e.g. 01).
2. Press <ENTER> to confirm the selection. Consequently, the screen will
display the instructions to reset after the mask is cleared.
3. Select <RESET> under the CLEAR MASK item and press <ENTER> to
proceed with resetting.
EXIT
Exit the PRIVACY MASK page and go back to the MAIN PAGE 3 to carry on
setup of time related setting.
18×/26× Model:
MAIN PAGE 3
IR FUNCTION
ALARM SETTING
ALARM DETECT
PRIVACY MASK
TIME SETTING
SCHEDULE
EXIT OSD
PRIVACY
OFF
BLACK
01
01
FIRST
YES
PRIVACY SWITCH
This option is used to enable or disable the masking function. Set this item to
<ON> before configuring mask zones.
AUTO
ENTER
ENTER
ENTER
ENTER
ENTER
YES