1. Manuals
  2. Brands
  3. Ganz Manuals
  4. IP Camera
  5. ZC-PT series
  6. Installation manual

Ganz ZC-PT SERIES Installation Manual

Mini ptz camera indoor
Hide thumbs Also See for ZC-PT SERIES:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Installation Manual

Advertisement

Table of Contents
loading

Related Manuals for Ganz ZC-PT SERIES

Summary of Contents for Ganz ZC-PT SERIES

  • Page 2 Installation Guide Preface The information given in this manual was current when published. The company reserves the right to revise and improve its products. All specifications are subject to change without notice. Notice This manual provides the installation information for indoor Mini Speed Dome Cameras.
  • Page 3 Installation Guide This symbol on the product or on its packaging indicates that this product shall not be treated as household waste in accordance with Directive 2002/96/EC. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

  • Page 4: Warnings And Cautions

    Installation Guide Warnings and Cautions • Handle the camera carefully Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage. • Installing electricity wiring carefully Ask qualified personnel of electrical wiring for the installation. Please note that input electricity to the unit is at tolerance of DC 12V/AC 24V ±...
  • Page 5 Installation Guide • Never face the camera towards the sun Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, the camera may be smeared or damaged.

  • Page 6: Table Of Contents

    Installation Guide Table of Contents Introduction ..........................7 Standard Package Content..................... 8 Camera Setups and Cable Connection ................10 Dome Camera Setups....................10 3.1.1 Switch Definition ..................... 10 3.1.2 Communication Switch Setting ................11 Analog Dome Camera ..................11 IP Dome Camera .................... 12 3.1.3 ID Setup (Analog Model) ................
  • Page 7 Installation Guide Signal Distribution Unit ....................48 Coaxial Telemetry......................49 System Integration........................ 50 Using Pelco Keyboard....................50 Using Philips Allegiant Keyboard................... 51 Appendix A: Technical Specification ..................52...

  • Page 8: Introduction

    Installation Guide Introduction The Mini Speed Dome Camera is a new subcompact high speed dome camera designed to deliver superb performance and durability with an intelligent and stylish housing that is suitable in any security and surveillance installation. General Operation Requirements: A minimum of one control device is required for operation, such as a Control Keyboard, a DVR or a PC.

  • Page 9: Standard Package Content

    Installation Guide Standard Package Content Before proceeding, please check the box contains the items listed here. If any item is missing, or if damage is evident, DO NOT install or operate the product and contact your dealer for assistance. Analog Dome Camera Package Data Cable for Power Supply, Video and RS-485 (for DC 12V model) Dome Camera...
  • Page 10 Installation Guide IP Dome Camera Package Data Cable for Power Supply, Video and Audio (AC 24V or DC 12V) Dome Camera Quick Guide M3 Screw, Fixing Plate Hard Ceiling Mount CD: Operation Manuals...

  • Page 11: Camera Setups And Cable Connection

    Installation Guide Camera Setups and Cable Connection Before installing or connecting the Dome Camera, please refer to this section and complete preparation, switch setting and communication switch settings. Dome Camera Setups Before connecting the Dome Camera to other devices of CCTV system, please complete the Dome Camera’s ID and communication switch setting.

  • Page 12: Communication Switch Setting

    Installation Guide The ID and Protocol numbers of an analog camera are set with a 10-bit and 6-bit dip switch respectively using binary system. For switch configuration details, please refer to Appendix B: Switch Settings Index Table in Mini Speed Dome Camera’s User Manual.

  • Page 13: Ip Dome Camera

    Installation Guide IP Dome Camera The IP Dome Camera’s communication switches are specified in the table below. Each switch’s default setting is shown as the figure below. DO NOT change the default setting, or some functions may not work properly. Communication Switch SW 1 Audio Setting...

  • Page 14: Camera Control Protocol Setup (Analog Model)

    Installation Guide 3.1.4 Camera Control Protocol Setup (Analog Model) Define the protocol you are going to use basing on the devices of your surveillance system. Generally, use one protocol even the devices are provided from different manufacturers. Use the switch to set your camera control protocol and the baud rate.

  • Page 15: Cable Definition And Requirements

    Installation Guide Cable Definition and Requirements For operation, the Dome Camera requires the video cable to carry the video signals to the remote viewing site, power cable to power the Dome Camera and RS-485 Data Cable to carry commands from the control device. 3.2.1 Cable Requirements For operation, the Speed Dome Cameras require video and Data Cables as...

  • Page 16: 22-Pin Connector Definition

    Installation Guide 3.2.2 22-Pin Connector Definition The analog and IP Dome Cameras’ Data Cables are illustrated as follows. Analog Dome Camera DC 12V Data Cable AC 24V Data Cable NOTE: Be careful not to pull the cables improperly during installation. Additionally, it is suggested to fasten the cables after cable connection is completed.

  • Page 17: Ip Dome Camera

    Installation Guide IP Dome Camera The IP Dome Camera’s Data Cables are illustrated as shown below. AC 24V Data Cable DC 12V Data Cable 3.2.3 22-Pin Connector Definition With the 22-pin connector, installers can simply connect the power, video and RS-485 cables to the Dome Camera at once.

  • Page 18: Analog Dome Camera

    Installation Guide Analog Dome Camera The analog Dome Camera’s 22-pin connector definition is listed as below. Definition Cable Definition Cable AC 24-1/DC (＋) 20AWG/18AWG ALM-1 ALM NC ALM-3 AC 24-2/DC (－) 20AWG/18AWG ALM-2 ALM NO ALM-4 20AWG/18AWG ALM-5 ALM COM ALM-6 ALM-7 ALM-8...

  • Page 19: Rs-485 Connector (Analog Model)

    Installation Guide 3.2.4 RS-485 Connector (Analog Model) RS-485 is the interface that communicates the Dome Camera and its control device. Please connect the Control Keyboard to the Speed Dome Camera through the terminal block. The recommended cables for RS-485 communication are CAT 5 cables; maximum cable length for over 24-gauge wire is 4000 feet (1219 meters).

  • Page 20: Ethernet Cable Connection

    Installation Guide Insert the terminal into the pin holes connector housing, with hook outward, as indicated in the figure. To unlock the terminal, press the hook, as indicated in the figure, with a proper tool and pull it out gently. Connect the 22-pin connector to its mating port on the back plate of the Dome...

  • Page 21: Dome Installation

    Installation Guide Dome Installation In the following sections, various Dome Camera installation accessories, installation methods and installation procedures will be described in detail. The next section will provide the Dome Camera’s dimension for your reference before installation. Dome Dimension The indoor Dome Camera’s dimension is 131 x 200 mm (5.2 x 7.9 Inches).

  • Page 22: Optional Accessories

    Installation Guide Optional Accessories Indoor Dome Camera Accessories Power Adapter 77H07-A1015 (Input: 100~115VAC/Output: 24VAC 36VA 77H07-A2015 (Input: 220~230VAC/Output: 24VAC 36VA) NOTE: When wiring, make sure the Ground wire inserted into the mid-pin of the terminal block Mounting Accessories Indoor Mount Adapter For mounting the indoor Dome Camera onto a pendent mount/Straight Tube.
  • Page 23 Installation Guide Compact Pendant Mount White; 184×104×115.2 mm (7.24×4.09×4.54 inches); 0.6 kg (1.2 lbs). Supplied with rubber washer-8×1, pendant tube washer×1, spring washer-8×1 and M8*12 screw×1. Straight Tube White, Iron, Height: 250/500 mm (9.8/19.7 inches) ,Diameter: 50 mm (2 inches) 1 kg (2.2 lbs) / 1.8 kg (4 lbs), Supplied with rubber washer-8×1, pendant tube washer×1, spring washer-8×1 and waterproof rubber×1, M8*12 screw×1.
  • Page 24 Installation Guide Corner Standard Mounting Plate White, 222×204×117 mm (8.7×8×4.6 inches); 2 kg (4.4 lbs); Supplied with washer-8×4, spring washer×4, M8*16 screw×4, M8 nut×4. Corner Thin Box Mounting White/Ivory, 300×164×222 mm (11.8×6.5×8.7 inches); 3 kg (6.7 lbs); Supplied with washer×4, M8*16 screw×4 and spring washer×4. Corner Wide Box Mounting White/Ivory;...
  • Page 25 Installation Guide Pole Thin Box Mounting White/Ivory; 291×136×242 mm (11.5×5.4×9.5 inches); 3.1 kg (6.9 lbs); Supplied with M8*16 screw×4, washer×4, spring washer×4, stainless steel straps×4. Pole Wide Box Mounting White/Ivory, 270×166×155 mm (10.6×6.5×6.1 inches); 3.2 kg (7.1 lbs); Supplied with M8*16 screw×4, washer×4, spring washer×4, stainless steel straps×4.
  • Page 26 Installation Guide Pole Thin Direct Mounting White/Ivory, 232×136×60 mm (9.1×5.4×2.4 inches); Diameter: 112~140 mm (4.4~5.5 inches); 0.7 kg (1.6 lbs); Supplied with stainless steel straps×4, M8*16 screw×4, washer×4. Pole Wide Direct Mounting White/Ivory, 270×170×60 mm (10.6×6.7×2.4 inches); Diameter: 112~130 mm (4.4~5 inches);...
  • Page 27 Installation Guide Other Application Accessories Repeater/Converter D77R1: RS-485/RS-422 Repeater D77R2: RS-232 between RS-485/RS-422 D77R3: Bi-phase to RS-485/RS-422 D77R1 D77R2 D77R3 Connector Box (Indoor Application) Recommended for wiring indoor dome alarm cables. White Color. 92×42 mm (3.7×1.7 inches); 0.13 kg (0.3 lbs); Supplied with cable×1, bracket×1 and M3*6 screw×2. Signal Distribution Unit Relay control codes to speed dome cameras.

  • Page 28: Ceiling Mount

    Installation Guide Ceiling Mount The Dome Camera can be mounted to the concrete ceiling with the supplied Hard Ceiling Mount and optional accessory: Straight Tube. 4.3.1 Hard Ceiling Mount The indoor Dome Camera can be mounted to the concrete ceiling with the supplied Hard Ceiling Mount.
  • Page 29 Installation Guide STEP 3 Drill on the four marked positions. STEP 4 Fix the Hard Ceiling Mount to the ceiling using the self-tapping screws as shown in the figure. STEP 5 Thread the Data Cable and/or Ethernet cable through center hole of the Mount and connect cable connector on the bottom of...
  • Page 30 Installation Guide STEP 7 Tighten the fixing screw, as marked in the figure, to fix the Dome Camera. STEP 8 Replace the Dome Camera’s Optical Cover if it is removed previously. The hard ceiling installation is complete.

  • Page 31: Straight Tube

    Installation Guide 4.3.2 Straight Tube The Straight Tube is available in different length: 25 cm and 30 cm. Items Needed: • Dome Camera • Data Cable (supplied) • Ethernet Cable (IP Dome Camera) • Straight Tube and equipped items (optional accessory) •...
  • Page 32 Installation Guide 7) Attach the Dome Camera to the Indoor Mount Adapter, aligning the adjustable screw of the Plastic Fixing Plate (see the left diagram below) with the mating screw hole (see the right diagram below) on the Indoor Mount Adapter, and screw them tightly. Ceiling Mount: Straight Tube + Indoor Mount Adapter...

  • Page 33: Wall Mount

    Installation Guide Wall Mount The Dome Camera can be mounted on the wall with Compact Pendent Mount, Standard Pendent Mount and Wall Box. Please follow the installation instructions below for mounting the Dome Camera via different ways. 4.4.1 Compact Pendent Mount Items Needed: •...
  • Page 34 Installation Guide NOTE: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendant Mount. The sponge can be placed in two ways as shown in the illustrations below. Sponge Sponge 4) Thread the cable(s) through the Indoor Mount Adapter and join the Indoor Mount Adapter to the Compact Pendent Mount with the supplied screws and washers.

  • Page 35: Standard Pendent Mount

    Installation Guide 4.4.2 Standard Pendent Mount Items Needed: • Dome Camera • Data Cable (supplied) • Ethernet Cable (IP Dome Camera) • Standard Pendent Mount and equipped items (optional accessory) • Indoor Mount Adapter (optional accessory) • Screws and Screw Anchors for fixing the Standard Pendent Mount onto the ceiling (not supplied) Tools Needed: •...
  • Page 36 Installation Guide Wall Mounting: Standard Pendent Mount + Indoor Mount Adapter...

  • Page 37: Wall Box Mounting

    Installation Guide 4.4.3 Wall Box Mounting Items Needed: • Dome Camera • Data Cable (supplied) • Ethernet Cable (IP Dome Camera) • Standard/Compact Pendent Mount and equipped items (optional accessory) • Wall Box Mounting (optional accessory) • Indoor Mount Adapter (optional accessory) •...
  • Page 38 Installation Guide Wall Box Mounting: Wall Box Mounting + Standard/Compact Pendent Mount + Indoor Mount Adapter...

  • Page 39: Corner Mount

    Installation Guide Corner Mount 4.5.1 Corner Standard Mounting Plate/Corner Plate Mini Items Needed: • Dome Camera • Data Cable (supplied) • Ethernet Cable (IP Dome Camera) • Standard/Compact Pendent Mount and equipped items (optional accessory) • Corner Standard Mounting Plate/Corner Plate Mini (herein collectively called “Corner Mounting Plate”;...
  • Page 40 Installation Guide 6) Attach the Dome Camera to the Indoor Mount Adapter, aligning the adjustable screw of the Plastic Fixing Plate with the mating screw hole on the Indoor Mount Adapter, and screw them tightly. See section 4.3.2 Straight Tube for illustrations.

  • Page 41: Corner Thin/Wide Box Mounting

    Installation Guide 4.5.2 Corner Thin/Wide Box Mounting Items Needed: • Dome Camera • Data Cable (supplied) • Ethernet Cable (IP Dome Camera) • Standard/Compact Pendent Mount and equipped items (optional accessory) • Corner Thin/Wide Box (optional accessory) • Indoor Mount Adapter (optional accessory) •...
  • Page 42 Installation Guide Corner Box Mounting: Corner Thin/Wide Box + Standard/Compact Pendent Mount + Indoor Mount Adapter...

  • Page 43: Pole Mount

    Installation Guide Pole Mount 4.6.1 Pole Thin/Wide Direct Mounting Items Needed: • Dome Camera • Data Cable (supplied) • Ethernet Cable (IP Dome Camera) • Standard/Compact Pendent Mount and equipped items (optional accessory) • Pole Thin/Wide Direct Mounting (optional accessory) •...
  • Page 44 Installation Guide 6) Attach the Dome Camera to the Indoor Mount Adapter, aligning the adjustable screw of the Plastic Fixing Plate with the mating screw hole on the Indoor Mount Adapter, and screw them tightly. See section 4.3.2 Straight Tube for illustrations.

  • Page 45: Pole Thin/Wide Box Mounting

    Installation Guide 4.6.2 Pole Thin/Wide Box Mounting Items Needed: • Dome Camera • Data Cable (supplied) • Ethernet Cable (IP Dome Camera) • Standard/Compact Pendent Mount and equipped items (optional accessory) • Pole Thin/Wide Box Mounting (optional accessory) • Indoor Mount Adapter (optional accessory) •...
  • Page 46 Installation Guide Pole Box Mounting: Pole Thin/Wide Box + Standard/Compact Pendent Mount + Indoor Mount Adapter...

  • Page 47: System Expansion

    Installation Guide System Expansion Connecting with Connector Box (Indoor) Ideally being used in indoor installation circumstances, a Connector Box provides easy wiring and well organized connection between alarms, cameras and other devices, for easy installation. To connect the connector box with other devices: •...

  • Page 48: Data Formats Transforming

    Installation Guide Data Formats Transforming To integrate other surveillance devices with the Speed Dome Cameras, we provide three kinds of converter/repeater to transform the communication formats between devices. If a converter/repeater is used, the total network distance of the surveillance system can be extended, and the connected devices will also be protected.

  • Page 49: Signal Distribution Unit

    Installation Guide Signal Distribution Unit The RS-485 Signal Distribution Unit (SDU) is designed to relay control codes to Speed Dome Cameras. It is capable of communicating with cameras up to 1.0 kilometers away. Additionally, the SDU can be installed in either “star” or “daisy chain”...

  • Page 50: Coaxial Telemetry

    Installation Guide Coaxial Telemetry The Coaxial Telemetry is a low-cost solution to long distance connection between Dome Cameras and controlling devices (e.g. DVR and keyboard). It simplifies the work of wiring by transmitting video and RS-485 control signals via one BNC line, so that to bring users economical benefits. The following is the coaxial telemetry application diagram.

  • Page 51: System Integration

    Installation Guide System Integration The Dome Camera is allowed to be integrated into other suppliers' surveillance systems with large set of built-in protocols. Refer to the following sections for more information. Using Pelco Keyboard The Speed Dome Camera can be controlled through a Pelco keyboard which built in with D protocol and P protocol.

  • Page 52: Using Philips Allegiant Keyboard

    Installation Guide Cable Definition (D Protocol Keyboard to PTZ Camera) T x+ T x - T x+ T x- Rx + For D Protoc ol Keyb oa rd For Sp e ed Dom e Using Philips Allegiant Keyboard The Dome Cameras can be integrated into Philips Allegiant systems through D77R3 repeaters.

  • Page 53: Appendix A: Technical Specification

    Installation Guide Appendix A: Technical Specification Items Indoor Mini PTZ Camera CAMERA CCD Sensor 1/4" EXview CCD Optical Zoom Digital Zoom 1× ~ 12× variable NTSC 380k Effective Pixels 440k Horizontal Resolution 540 TVL NTSC / PAL Scanning System Synchronization Internal / Line Lock 1.0 Vp-p / 75 Ω, BNC Video Output...
  • Page 54 Installation Guide Motion Detection On / Off On / Off Wide Dynamic Range Day/Night: IR Cut Filter On / Off Image Freeze On / Off Image Inverse On / Off On / Off Noise Reduction On / Off Alarm Input Alarm Output Alarm Reaction Preset, Sequence, Auto pan, Cruise...

Table of Contents