Ganz ZC-PT Series User Manual page 51

•
SHADE
The color of a privacy mask can be selected through this item. The available
colours are black, gray and white.
•
SET MASK
After pressing <ENTER> to enter the sub-menu of SET MASK, the camera
will memorize the present position as a privacy mask position; up to 8 masks
can be set. The model restricts the mask zones to be set too close with each
other.
NOTE: For 23× and 35× models, the available area for setting a
privacy mask is restricted within tilt angle 45°, and two mask zones
are allowed to set in a view area.
MASK01 MENU
H CENTER
V CENTER
H SIZE
V SIZE
EXIT+SAVE
H CENTRE (000~255)
The original centre of the mask zone is the centre of the screen. The user can
move the centre of the mask zone to another position by adjusting this value
by pressing the LEFT/RIGHT keys.
V CENTRE (000~255)
The original centre of the mask zone is the centre of the screen. The user can
move the centre of the mask zone to another position by adjusting this value
by pressing the LEFT/RIGHT keys.
H SIZE (000~127)
This option allows the user to adjust the horizontal size of the privacy mask.
Setting the H and V size to 0 deletes the selected mask.
V SIZE (000~127)
This option allows the user to adjust the vertical size of the privacy mask.
Setting the H and V size to 0 deletes the selected mask.
NOTE: A mask's size should be limited within the screen, whatever
the optical zoom is
•
CLEAR MASK
Users can delete a preset mask zone with this item. Please follow the steps
listed below.
000
000
000
000
YES
User's Manual
50