Power Button Board - HP Pavilion 14 Maintenance And Service Manual

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4. Remove the battery (see
a. Optical drive (see
b. Service door (see
c. Keyboard (see
d.
WLAN module (see
e.
Memory module (see
f.
Top cover (see
Remove the power button board:
1.
Turn the top cover upside down, with the front toward you.
2. Remove the Phillips PM2.5×2.5 screw (1) that secures the power button board to the top cover.
Battery on page 49), and then remove the following components:
Optical drive on page
Service door on page
Keyboard on page 62)
WLAN module on page
Memory module on page
Top cover on page 67)
55)
50)
53)
51)
Component replacement procedures
Spare part number
734416-001
75