Reverse this procedure to install the WLAN module.
Optical drive
NOTE:
The optical drive spare part kit includes a bezel and bracket.
Description
Optical drive, SuperMulti DVD±R/RW Double-Layer Drive (includes bezel, bracket, and screws)
Before removing the optical drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Remove the optical drive:
1.
Using a small Phillips screwdriver, remove the Phillips M2.5×6.5 screw that secures the optical
drive to the computer (1).
2.
Using the screwdriver, push on the rear of the optical drive to disconnect it from the computer
Battery on page
49).
Spare part number
734415-001
Component replacement procedures
55