Rtc Battery - HP Pavilion 14 Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4. Remove the battery (see
a. Optical drive (see
b. Service door (see
c. Remove the WLAN module (see
d.
Remove the Memory module (see
e.
Keyboard (see
f.
Top cover (see
g.
Hard drive (see
h.
System board (see
Remove the RTC battery:
1.
Turn the system board upside down, with the front toward you.
2. Use a flat-bladed, non-metallic tool (1) to release the RTC battery from the socket on the
system board. The battery is spring loaded and will pop up.
Battery on page 49), and then remove the following components:
Optical drive on page
Service door on page
WLAN module on page
Memory module on page
Keyboard on page 62)
Top cover on page 67)
Hard drive on page 71)
System board on page
55)
50)
53)
51)
80)
Component replacement procedures
Spare part number
697917-001
87