Memory Module - HP Pavilion 14 Maintenance And Service Manual

Memory module

Description
4 GB memory module (PC3, 12800, 1600 MHz)
2 GB memory module (PC3, 12800, 1600 MHz)
8 GB memory module (PC3, 12800, 1600 MHz)
NOTE: Before adding memory modules, make sure the computer has the most recent BIOS version,
and update the BIOS if needed. For Windows operating systems, see
on page 105; for Linux Ubuntu, see
Before removing a memory module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the service door (see
Remove the memory module:
NOTE: Note the location of the memory module (1) you are removing. If you are replacing it, install
the new memory module in the same slot.
1. Spread the two retaining tabs (1) on each side of the memory module slot to release
the memory module. (The memory module tilts up.)
Updating the BIOS on page
Battery on page 49).
Service door on page
Updating the BIOS
110.
50).
Component replacement procedures
Spare part number
691740-001
691739-001
693374-001
51