Roland ColorCamm PC-12 User Manual page 91

If one of the following messages appears, turn the PC-12 off then back on, then perform output again. If the message continues to appear,
contact your authorized Roland DG Corp. dealer or Roland DG Corp. service center.
Error message
The printer has encountered an error in the printer motor.
The printer has encountered an error in the cartridge changer.
The printer has encountered an error in the CR motor.
The printer has encountered an error in the LF motor.
The printer has encountered an error in the media cutting motor.
The printer has encountered an error in the up-down motor.
The printer has encountered an error in the thermostat.
The printer has encountered an error in the EEPROM.
The printer has encountered an error in the cutting motor.
This print job cannot be completed because the ribbon of ink cartridge XXXX in holder 'X' was
broken.
Replace with a new ink cartridge.
The printer is not responding.
Part 7 Troubleshooting
89