Roland ColorCamm PC-12 User Manual page 87

Error message
This print job cannot be completed.
The printer has encountered an error in the EEPROM.
Remedy
1 Switch off the PC-12, then unplug the power cord.
2 Again plug in the power cord and turn on the power.
3 Restart the computer.
Error message
This print job cannot be completed.
The printer has encountered an error in the CR motor.
Remedy
An HP sensor, the RE sensor, or the indicator sensor may be dirty.
Check for soiling and clean the HP sensors, RE sensor, and indicator sensor.
Go to "6.1 Cleaning" and refer to "Cleaning the HP Sensors, RE Sensor, and Indicator Sticker."
Error message
This print job cannot be completed.
The printer has encountered an error in the LF motor.
Remedy
The media in use may be media that the PC-12 cannot use, such as media that is creased, dirty, or that has been cut. Check the media.
1
The media-feed rollers may be dirty of have buildup of grime. Clean the media-feed rollers.
2
Go to "6.1 Cleaning" and refer to "Cleaning the Media-feed Rollers."
Error message
This print job cannot be completed.
The printer has encountered an error in the thermostat.
Remedy
This may appear when temperature rises during continuous printing. In such cases, switch off the power and open the front cover to
allow heat to dissipate.
Part 7 Troubleshooting
85