Roland ColorCamm PC-12 User Manual page 48

Part 4 Steps Up Through Printing and Cutting
Specify [0.01 pt] as the width of the line that is to be the
3
cutting line.
Use the Minimum Value for the Line Width
If you're using a different program, specify the minimum available value for the width of the line that is to be the
cutting line. Cutting may be impossible if the minimum value is not used.
For each the following programs, specify the respective indicated line width for the cutting line.
Adobe Illustrator 9.0/9.0.2 ........................... 0.001 pt (The indicated line width is 0 pt.)
Adobe Illustrator 8.0/8.0.1 ........................... 0.01 pt
Adobe Illustrator 7.0/7.01 ........................... 0 pt
CorelDRAW 10/9/8/7 .................................. 0.001 mm
Tips for Drawing the Cutting Line
You can produce attractive stickers by draw cutting lines like those shown below.
Leave a blank margin around the image.
Apply color to the edge.
46
Cutting line
Media
Cutting line
Media
When peeled off the
media and applied
When peeled off the
media and applied