Roland ColorCamm PC-12 User Manual page 31

1 Switch off the power to the PC-12 and press the front-cover
eject button. When the internal lock is released, open the
front cover gently while supporting it with your hands.
2 Grasp the ink-ribbon cartridge at the center with your
thumb and index finger, and push the ink-ribbon cartridge
to the left so as to press the latch on the left edge of the
holder. Lift up the right side of the ink-ribbon cartridge and
remove the ink-ribbon cartridge.
3 Install a new ink-ribbon cartridge.
Refer to "To Install Ink-ribbon Cartridges" in the previous
section.
4 Check all ink cartridges installed in the ink-ribbon cartridge
holders for slackness. If you find one that is slack, remove
the ink-ribbon cartridge from the cartridge holder and take
up the slack.
Latch (blue area)
Part 3 Getting Ready
29