Roland ColorCamm PC-12 User Manual page 20

Part 2 Installing the Driver
Installation starts. When it ends, the [Setup Complete]
7
screen appears.
To finish installation, click [Finish].
If you chose [USB port connection], an important
note appears at the [Setup Complete] screen.
After you have finished step 8, use a USB cable to
connect the computer and the PC-12, then turn on
the PC-12. The driver for the PC-12 is automatically
registered with the Windows system, and the
installation operation ends.
For more information, go to Part 3 and refer to
"Connecting to the Computer."
If you previously installed the driver for PC-12 and
deleted the PC-12 driver without using the Setup
program, then you need to restart Windows in order
to finish setup. Click [Finish] to restart Windows.
Installation finishes when Windows restarts.
If any other programs are running, quit the programs
before you click [Finish].
8 When the setup menu appears, click the
9 Remove the CD-ROM from the CD-ROM drive.
18
button.