Roland ColorCamm PC-12 User Manual page 29

As shown in the figure, insert a pencil or the like into side B
2
of the ink-ribbon cartridge and turn clockwise to take up
slack in the ink ribbon.
Switch off the power to the PC-12 and press the front-cover
3
eject button. When the internal lock is released, open the
front cover gently while supporting it with your hands.
Arrange the ink cartridge so that side B faces up and grasp
4
the ink cartridge at the center using your thumb and index
finger.
While grasping the ink-ribbon cartridge between your
5
thumb and index finger, insert the ink-ribbon cartridge into
the ink-cartridge holder so that the left side of the ink
cartridge presses the latch (the blue area that holds the ink
cartridge in place) on the left side of the ink-cartridge
holder. Install the ink-ribbon cartridge by pressing it in from
above.
6 Make sure the ink-ribbon cartridge is held securely by the
white tab, blue tab, and two gray tabs on the ink-ribbon
cartridge holder, and that there is no slack in the ribbon.
"B" indication
Ink ribbon
Latch (blue area)
Gray tabs (two locations)
White tab
Part 3 Getting Ready
"B" indication
Insert a pencil or
the like and turn.
Blue tab
27