Snapshot (For Video Recording) - JVC GR-DVP3 Instructions Manual

52
EN
MENU Button
SET/SELECT
Button
SNAPSHOT Button
Display
SNAP MODE – P I N–UP
FRAME
FUL L
MUL T I – 4
MUL T I – 9
NOTES:
To remove the shutter sound,
pg. 40, 42.
Even if "MULTI-4" or "MULTI-9" is engaged,
Snapshot recording will be performed in the
FULL mode during Digital Zoom or Night-
Alive ( pg. 48).
If Snapshot recording is not possible, "
blinks when SNAPSHOT is pressed.
If Program AE with special effects (
is engaged, certain modes of Program AE
with special effects are disabled during
Snapshot recording. In such a case, the icon
blinks.
If SNAPSHOT is pressed when "DIS" is set
to "ON" ( pg. 41), the Stabiliser will be
disabled.
During playback as well, all snapshot modes
are available when "
to "OFF" in the Menu Screen (
However, the shutter sound is not heard.
When a cable is connected to the AV
connector, the shutter sound is not heard
from the speaker, however it is recorded
onto the tape.
+, – Button
VIDEO/MEMORY
Switch
Power Switch
Lock Button
CAMERA Menu
"BEEP" on
pg. 48)
COPY" is set
pg. 44).
FOR RECORDING

Snapshot (For Video Recording)

This feature lets you record still images that look like
photographs onto a tape.
SNAPSHOT MODE SELECTION
1
Set the VIDEO/MEMORY Switch to "VIDEO", then
set the Power Switch to "
the Lock Button located on the switch. Open the
LCD monitor fully or pull out the viewfinder fully.
2
Press MENU. The Menu Screen appears.
3
Press + or – to select "
SELECT. The CAMERA Menu appears.
4
Press + or – to select "SNAP MODE", then press
SET/SELECT.
5
Press + or – to select the desired Snapshot mode,
then press SET/SELECT. Press + or – to select
" RETURN" and press SET/SELECT twice. The
Menu Screen closes.
•The available Snapshot modes are as the same as
those on page 29.
SNAPSHOT RECORDING
1
Press SNAPSHOT.
is being taken.
If you press during Record-Standby . . .
.... "PHOTO" appears and a still image will be
recorded for approx. 6 seconds, then the
camcorder re-enters the Record-Standby mode.
If you press during Recording . . .
.... "PHOTO" appears and a still image will be
recorded for approx. 6 seconds, then the normal
recording resumes.
•Regardless of the Power Switch position ("
" "), Snapshot recording takes place using the
"
selected Snapshot mode.
Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar to
serial photography. (Interval between still images:
approx. 1 second)
The Motor Drive mode is disabled when "REC SELECT"
is set to "
( pg. 43).
" while pressing down
CAMERA", then press SET/
appears while the snapshot
/ " in the Menu Screen
(cont.)
" or