Setting Print Information (Dpof Setting) - JVC GR-DVP3 Instructions Manual

36
EN
SET/SELECT
Button
Display
DPOF – SELECT
AL L
RESET
DPOF
AL L – CANCEL
EXECUTE
VIDEO/MEMORY
Switch
Power Switch
Lock Button
MENU Button
+, – Button
DPOF Menu
Confirmation
Screen
D.S.C. PLAYBACK

Setting Print Information (DPOF Setting)

This camcorder is compatible with the DPOF (Digital
Print Order Format) standard in order to support future
systems such as automatic printing, which records
information about the still images you wish to print (such
as the number of prints to make). There are 2 print
information settings available: "To print all still images
(one print for each)" explained below and "To print by
selecting still images and no. of prints" (
TO PRINT ALL STILL IMAGES (ONE PRINT
FOR EACH)
1
Set the VIDEO/MEMORY Switch to "MEMORY",
then set the Power Switch to "
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder
fully.
2
Press MENU. The Menu Screen appears.
3
Press + or – to select "
SELECT. The MEMORY Menu appears.
4
Press + or – to select "DPOF" and press SET/SELECT.
The Sub Menu appears.
5
Press + or – to select "ALL" and press SET/SELECT.
Selection is complete. The Confirmation Screen
appears.
6
Press + or – to select "EXECUTE" and press SET/
SELECT. The normal playback screen appears.
•To cancel selection, press + or – to select "CAN-
CEL" and press SET/SELECT.
To Reset The Setting . . .
.... select "RESET" in step 5. The setting is reset to 0 for
all still images.
(cont.)
pg. 37).
" while pressing
MEMORY" and press SET/