JVC GR-DVP7U Service Manual
Hide thumbs Also See for GR-DVP7U:
Table of Contents

Advertisement

JVC SERVICE & ENGINEERING COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
Head office
:
1700 Valley Road Wayne, New Jersey 07470-9976
East Coast
:
10 New Maple Avenue Pine Brook, New Jersey 07058-9641
Midwest
:
705 Enterprise Street Aurora, Illinois 60504-8149
:
5665 Corporate Avenue Cypress, California 90630-0024
West Coast
:
1500 Lakes Parkway Lawrenceville, Georgia 30043-5857
Atlanta
:
2969 Mapunapuna Place Honolulu, Hawaii 96819-2040
Hawaii
JVC CANADA INC.
:
Head office
21 Finchdene Square Scarborough, Ontario M1X 1A7
:
Montreal
16800 Rte Trans-Canadienne, Kirkland, Quebec H9H 5G7
:
Vancouver
13040 Worster Court Richmond, B.C. V6V 2B3
(973)317-5000
(973)396-1000
(630)851-7855
(714)229-8011
(770)339-2582
(808)833-5828
(416)293-1311
(514)871-1311
(604)270-1311
S40895-04
Printed in Japan
SERVICE MANUAL

DIGITAL VIDEO CAMERA

GR-DVP7U
SPECIFICATIONS
Camcorder
For General
Power supply
: DC 6.3 V (Using AC Power Adapter/Charger)
DC 7.2 V (Using battery pack)
Power consumption
LCD monitor off, viewfinder on : Approx. 4.2 W
LCD monitor on, viewfinder off : Approx. 5.0 W
Dimensions (W x H x D)
: 43 mm x 115 mm x 80 mm (1-3/4" x 4-9/16" x 3-3/16")
(with the LCD monitor closed and the viewfinder pushed back in)
Weight
: Approx. 350 g (0.78 lbs) (without grip belt, battery and cassette)
Approx. 420 g (0.93 lbs) (incl. grip belt, battery and cassette)
Operating temperature
: 0°C to 40°C (32°F to 104°F)
Operating humidity
: 35% to 80%
Storage temperature
: –20°C to 50°C (–4°F to 122°F)
Pickup
: 1/3.8" CCD
Lens
: F 1.8, f = 3.8 mm to 38 mm, 10:1 power zoom lens
(It is not possible to attach any lens filter or conversion lens.)
LCD monitor
: 2" diagonally measured, LCD panel/TFT active matrix system
Viewfinder
: Electronic viewfinder with 0.44" color LCD
Speaker
: Monaural
For Digital Video Camera
Format
: DV format (SD mode)
Signal format
: NTSC standard
Recording/Playback format
: Video : Digital component recording
Audio : PCM digital recording, 32 kHz 4-channel (12-bit), 48 kHz
2-channel (16-bit)
Cassette
: Mini DV cassette
Tape speed
: SP: 18.8 mm/s
LP: 12.5 mm/s
Maximum recording time
: SP: 80 min.
(using 80 min. cassette)
LP: 120 min.
For Digital Still Camera
Storage media
: SD Memory Card/MultiMediaCard
Compression system
: Still image
: JPEG (compatible)
Moving image : MPEG4 (compatible)
File size
Still Image
: 3 modes (1280 x 960 pixels/1024 x 768 pixels/640 x 480 pixels)
Moving Image
: 2 modes (240 x 176 pixels/160 x 120 pixels)
Picture quality
: 2 modes (FINE/STANDARD)
Approximate number of storable images
: « pg. 49
This service manual is printed on 100% recycled paper.
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.
For Connectors
S/AV
: Y: 0.8 V to 1.2 V (p-p), 75 Ω, analog
S-Video input
C: 0.2 V to 0.4 V (p-p), 75 Ω, analog
: Y: 1.0 V (p-p), 75 Ω, analog
S-Video output
C: 0.29 V (p-p), 75 Ω, analog
: Y: 0.8 V to 1.2 V (p-p), 75 Ω, analog
Video input
: Y: 1.0 V (p-p), 75 Ω, analog
Video output
Audio input
: 300 mV (rms), 1 kΩ, analog, stereo
Audio output
: 300 mV (rms), 50 kΩ, analog, stereo
Edit
: ø3.5 mm, 2-pole
Headphone output
: Stereo
DV
Input/output
: 4-pin, IEEE 1394 compliant
USB
: 5-pin
AC Power Adapter/Charger
For General
Power requirement
U.S.A. and Canada
: AC 120 V ` , 60 Hz
Other countries
: AC 110 V to 240 V ` , 50 Hz/60 Hz
Power consumption
: 23W
Output
Charge
: DC 7.2 V
}
, 1.2 A
VTR
: DC 6.3 V
}
, 1.8 A
Weight
: Approx. 255 g (0.57 lbs)
Specifications shown are for SP mode unless otherwise indicated. E & O.E.
Design and specifications subject to change without notice.
No. 86684
March 2002

Advertisement

Table of Contents
loading

Summary of Contents for JVC GR-DVP7U

  • Page 1: Digital Video Camera

    : Y: 0.8 V to 1.2 V (p-p), 75 Ω, analog S-Video input For General JVC SERVICE & ENGINEERING COMPANY OF AMERICA C: 0.2 V to 0.4 V (p-p), 75 Ω, analog Power supply : DC 6.3 V (Using AC Power Adapter/Charger) : Y: 1.0 V (p-p), 75 Ω, analog...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Section Title Page Section Title Page Important Safety Precautions 3. ELECTRICAL ADJUSTMENT 3.1 PRECAUTION ............... 3-1 INSTRUCTIONS 3.2 SETUP .................. 3-2 1. DISASSEMBLY 1.1 BEFORE ASSEMBLY AND DISASSEMBLY ......1-1 4. CHARTS AND DIAGRAMS 1.1.1 Precautions ..............1-1 1.1.2 Assembly and disassembly ..........
  • Page 3: Important Safety Precautions

    Important Safety Precautions Prior to shipment from the factory, JVC products are strictly inspected to conform with the recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.
  • Page 4 • Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions, Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards.
  • Page 5: Disassembly

    SECTION 1 DISASSEMBLY 1.1 BEFORE ASSEMBLY AND DISASSEMBLY 1.1.4 Disconnection of Connectors (Wires) 1.1.1 Precautions Connector Pull both ends of the connector in the arrow direction, re- 1. Be sure to remove the power supply unit prior to mount- move the lock and disconnect the flat wire. ing and soldering of parts.
  • Page 6: Jigs And Tools Required For Disassembly, Assembly And Adjustment

    1.2 JIGS AND TOOLS REQUIRED FOR DISASSEMBLY, 1.3 DISASSEMBLY/ASSEMBLY OF CABINET PARTS ASSEMBLY AND ADJUSTMENT AND BOARD ASSEMBLY 1.2.1 Tools required for adjustments 1.3.1 Disassembly flow chart This flowchart indicates the disassembly step for the cabi- Torque driver YTU94088 YTU94088-003 net parts and board assembly in order to gain access to item(s) to be serviced.
  • Page 7: Disassembly Method

    1.3.2 Disassembly method NOTE a: If a card is installed, remove it in advance. STEP Fig.No. PART POINT NOTE NOTE b: Be careful not to damage the battery removal switch. COVER (UNDER) Fig.1-3-1 (S1) — When disassembling, ensure that the lock lever is in the low position and set the battery removal switch only to COVER (SHOE) Fig.1-3-2 2(S2), 2(L2)
  • Page 8 Fig. 1-3-2 Fig. 1-3-1 NOTE NOTE BATT. RELEASE SWITCH COVER (SD) LOCK LEVER Fig. 1-3-3a...
  • Page 9 NOTE COVER (M/USB) NOTE ∗ ∗ ∗ : 0.118 N m (1.2 kgf • • Fig. 1-3-3b ∗ GUIDE ∗ (MONI) ∗ NOTE ∗ NOTE ∗ : 0.098 N m (1.0 kgf • • Fig. 1-3-4 Fig. 1-3-5...
  • Page 10 NOTE CASS. COVER CASS. COVER NOTE SHEET (SHUTTER) Fig. 1-3-6 Fig. 1-3-7 BRACKET(MECHA) ASSY SHEET (SHUTTER) SHIELD ASSY BRACKET (PRE/REC) Fig. 1-3-8...
  • Page 11 NOTE NOTE NOTE NOTE NOTE OP MDA Fig. 1-3-9a NOTE NOTE KNOB (VIDEO /DSC) NOTE Fig. 1-3-9b...
  • Page 12: Disassembly Of 5 Monitor Assembly

    1.4 DISASSEMBLY OF 5 MONITOR ASSEMBLY 1.4.2 Hinge assembly 1. Remove the two screws (4,5) to take out the FPC assem- 1.4.1 5 Monitor assembly/Hinge assembly bly while removing the hinge cover (L). 1. Remove the three screws (1 to 3) and then remove the Note c: Be careful not to lose any part during the above- monitor cover by disengaging the two hooks (L5a, L5b)
  • Page 13: Disassembly Of @ Op Block Assembly/Ccd Board Assembly

    1.5 DISASSEMBLY OF @ OP BLOCK ASSEMBLY/CCD 1.5.3 How to install @ OP block assembly and CCD BOARD ASSEMBLY board assembly 1. Install the optical LPF with the @ OP block assembly. 1.5.1 Precautions 2. With the spacer rubber left attached to the CCD base 1.
  • Page 14: E. Vf Assembly

    1.6 DISASSEMBLY OF E. VF ASSEMBLY 1.6.1 E. VF assembly Note a: When disassembling the E. VF assembly, remove <Frame (VF)> the frame (VF) from the case assembly depend- 6. Remove the screw (6) first and then LCD module/holder ing on the situation. (LCD).
  • Page 15: Emergency Display

    1.7 EMERGENCY DISPLAY Whenever some abnormal signal is input to the syscon CPU, Example (in case of the error number E01): an error number (E01, as an example) is displayed on the LCD monitor or (in the electronic view finder). In every error status, such the message as shown below alternately appear over and over.
  • Page 16: Service Know-How

    1.8 SERVICE KNOW-HOW 1. See Fig. 1-8-1. When performing disassembly/assembly work to this model, the parts that are most complicated and require special at- (1) While moving the ! microphone out of way, remove the tention are the E. VF unit and the OP MDA board, OP block screw (39) and take out the @ OP block assembly.
  • Page 17 2. See Fig. 1-8-2. (1) Remove the two screws (44, 45) in order to free the $ OP MDA board assembly. (2) Remove the two screws (46, 47) and take out the $ OP MDA board assembly together with the @ OP block as- sembly and the % shoe assembly.
  • Page 18: Service Note

    1.9 SERVICE NOTE 1-14...
  • Page 19: Mechanism Adjustment

    SECTION 2 MECHANISM ADJUSTMENT 2.1 PRELIMINARY REMARKS ON ADJUSTMENT AND (5) This column indicates parts and points such as screws, REPAIR washers,springs,and others to be removed/fitted for dis- assembling/reassembling the mechanism. Besides such 2.1.1 Precautions the parts, this column occasionally indicates working 1.
  • Page 20: Jigs And Tools Required For Disassembly, Assembly And Adjustment

    2.2 JIGS AND TOOLS REQUIRED FOR DISASSEMBLY, ASSEMBLY AND ADJUSTMENT 2.2.1 Tools required for adjustments 1. Torque driver Torque driver YTU94088 YTU94088-003 Be sure to use to fastening the mechanism and exterior parts because those parts must strictly be controlled for tightening torque.
  • Page 21: Disassembly/Assembly Of Mechanism Assembly

    2.3 DISASSEMBLY/ASSEMBLY OF MECHANISM AS- 2.3.2 Explanation of mechanism mode SEMBLY The mechanism mode of this model is classified into five 2.3.1 General statement modes as shown in Table 2-3-1. Each mechanism mode can be distinguished from others by the relative position The mechanism should generally be disassembled/assem- of “...
  • Page 22: Mechanism Timing Chart

    2.3.3 Mechanism timing chart MODE SHORT TU. P. B SLIDE TU. P. B SLIDE RELEASE EJECT CAS. IN START START STOP PLAY PARTS MAIN CAM -12.40° 0° (22.44°) 58.71° (69.53°) (80.5°) (150.58°) (153.5°) 177.79° 212.77° 243.94° SUB CAM -16.97° 0° (30.71°) 80.34°...
  • Page 23: Disassembling Procedure Table

    2.4 DISASSEMBLING PROCEDURE TABLE MARK: After assembly, perform adjustments. PART NAME FIG. POINT NOTE REMARKS CASSETTE HOUSING ASSY Fig.2-4-3 ),(L a)-(L NOTE a,b,c,d ADJUSTMENT UPPER BASE ASSY Fig.2-4-4 ),(L a),(L NOTE DRUM ASSY a),2(S NOTE REEL DISK ASSY(SUP) Fig.2-4-5 NOTE REEL DISK ASSY(TU) NOTE REEL COVER ASSY...
  • Page 24 < TOP VIEW > 24 27 36 35 Fig. 2-4-1 < BOTTOM VIEW > 31 16 Fig. 2-4-2...
  • Page 25: Disassembly/Assembly

    2.4.1 Disassembly/assembly CASSETTE HOUSING ASSY NOTE NOTE Be careful not to damage any of the parts during work. NOTE NOTE NOTE Special care is required in mounting. NOTE NOTE LOCK When mounting, the CASSETTE NOTE LEVER HOUSING ASSY should be at- NOTE tached in the Eject status.
  • Page 26 REEL DISK ASSY(SUP) REEL DISK ASSY(TU) REEL COVER ASSY NOTE NOTE Be careful not to attach the REEL DISK wrongly. The Sup- NOTE ply side can be identified by the white color at the center. NOTE NOTE REEL DISK ASSY Be careful not to attach the REEL DISK wrongly.
  • Page 27 SLIDE DECK ASSY NOTE Each of the parts on the SLIDE DECK ASSY can be re- placed separately. When detaching the assembly, if there is no need to replace any of its parts, remove the SLIDE DECK ASSY as it is. NOTE When mounting, pay attention to the positions of the ¤...
  • Page 28 TENSION CTL LEVER ASSY CENTER GEAR & PINCH ROLLER ARM F. ASSY TENSION CTL PLATE ASSY BRAKE CTL LEVER ASSY NOTE NOTES When mounting, pay attention to the correct positioning. NOTE NOTE NOTE (TOP) NOTE (BOTTOM) NOTE NOTES When mounting, pay atten- &...
  • Page 29 fl BASE R ASSY ‡ ROTARY ENCODER ° GEAR COVER ASSY · MAIN CAM ASSY NOTE fl NOTE NOTE When mounting, fold the sliding part to the inner side. ‡ NOTE NOTE When mounting, pay attention to the correct positioning and the FPC layout.
  • Page 30 ∞ DRUM BASE ASSY § CAPSTAN MOTOR ¶ MAIN DECK ASSY ∞ § NOTES When detaching, remove them together and then separate § from ∞ . ∞ NOTE When mounting, attach the DRUM BASE ASSY so that the screw hole is located at the center of the ellipse. NOTE NOTE NOTE...
  • Page 31: List Of Procedures For Disassembly

    2.4.2 List of procedures for disassembly Fig. 2-4-13 2-13...
  • Page 32: Checkup And Adjustment Of Mechanism Phase

    2.5 CHECKUP AND ADJUSTMENT OF MECHANISM PHASE MODE GEAR ROTARY ENCODER Align the MODE GEAR with the Main Deck Mount the ROTARY ENCODER by aligning its mark ( Assembly hole. and the mark ( ) of the Main Deck Assembly. Note: Note: Be careful when handling the FPC during mounting.
  • Page 33: Mechanism Adjustments

    2.6 MECHANISM ADJUSTMENTS 2.6.1 Adjustment of the slide guide plate Use Fig. 2-6-1 as the reference unless otherwise specified. 1. Set the PLAY mode. See Fig. 2-3-8. 2. Loosen the screws ( A , B ). 3. With the Main Deck and Slide Deck Assemblies pushed into the unit, tighten the screws ( A , B ) while applying pressure to the stud (shaft) on the Slide Guide plate.
  • Page 34: Adjustment Of The Tension Arm And Pad Arm Assemblies

    2.6.2 Adjustment of the Tension Arm and Pad Arm As- 2.6.3 Adjustment of the Slide Lever 2 semblies Use Fig. 2-6-3 as the reference unless otherwise specified. Use Fig. 2-6-2 as the reference unless otherwise specified. 1. Set the C IN mode. 1.
  • Page 35: Service Note

    2.7 SERVICE NOTE Use the following chart to manage mechanism parts that are removed for disassembling the mechanism. Fig. Fig. CASSETTE HOUSING ASSY UPPER BASE ASSY Fig. Fig. REEL DISK ASSY(SUP) REEL COVER ASSY DRUM ASSY REEL DISK ASSY(TU) Fig. TENSION ARM ASSY SLANT POLE ARM ASSY TU ARM ASSY...
  • Page 36 Fig. PINCH ROLLER TENSION BRAKE CTL TENSION CTL CENTER GEAR ARM F. ASSY CTL PLATE LEVER LEVER ASSY ASSY ASSY Fig. MOTOR GUIDE SLIDE LEVER 2 LOADING BRACKET RAIL ASSY ASSY PLATE ASSY ASSY MODE GEAR EJECT LEVER Fig. BASE R ASSY ROTARY GEAR COVER MAIN CAM ASSY...
  • Page 37: Compatibility Adjustment

    2.8 COMPATIBILITY ADJUSTMENT 2.8.2 Tape pattern check 2.8.1 Jig connector cable connection (1) Play back the compatibility adjustment tape. (2) While triggering the MAIN CN114-11PIN (HID1), ob- Remove one screw (1) first and the cover (JIG) next. serve the waveform of CN114-29PIN (ENV_OUT). (3) Confirm that the waveform is free from remarkable level-down, and entirely parallel and straight.
  • Page 38: Electrical Adjustment

    SECTION 3 ELECTRICAL ADJUSTMENT 3.1 PRECAUTION 1. Precaution 3. Tools required for adjustments Both the camera and deck sections of this model needs a Torque driver personal computer for adjustment except simple adjustment YTU94088 YTU94088-003 with potentiometers. If some of the following parts is replaced for repair or other reason, the repaired set must be adjusted with a personal computer.
  • Page 39: Setup

    Torque driver Service support system Be sure to use to fastening the mechanism and exte- To be used for adjustment with a personal computer. rior parts because those parts must strictly be control- 10. INF adjustment lens led for tightening torque. To be used for adjustment of the camera system.
  • Page 40: Packing And Accessory Assembly

    SECTION 5 PARTS LIST SAFETY PRECAUTION Parts identified by the symbol are critical for safety. Replace only with specified part numbers. REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ******************************...
  • Page 41 FINAL ASSEMBLY <M2> 236A ELECTRONIC VIEWFINDER <M4> 236B MECHANISM 127A <M3> OP MDA <02> 185A MAIN 185A <01> 188A 185A 125A 125B 185B 125C BOTTOM <03> <05> EJECT 152A <06> OPTICAL BLOCK 152B SECTION 255C 255D 255D 152C 255H 255C 255C 255B 255G 251F...
  • Page 42: Final Assembly

    REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 43: Mechanism Assembly

    BEWARE OF BOGUS PARTS Parts that do not meet specifications may cause trouble in regard to safety MECHANISM ASSEMBLY <M3> and performance. We recommend that genuine JVC parts be used. 436B 436B 436A Classification Part No. Symbol in drawing Grease...
  • Page 44 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 45: Electronic Viewfinder Assembly

    ELECTRONIC VIEWFINDER ASSEMBLY <M4> VF BL <07> REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 46: Monitor Assembly

    MONITOR ASSEMBLY <M5> 501A 501B 501C MONITOR <04> REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 47: Electrical Parts List

    ELECTRICAL PARTS LIST REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 48 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 49 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 50 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 51 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 52 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 53 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 54 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 55 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 56: Op Mda Board Assembly <02

    REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 57: Bottom Board Assembly <03

    REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 58: Ccd Board Assembly <05

    MG RESISTOR 3.3kØ,1/16W R7002 NRSA63J-561X MG RESISTOR 560Ø,1/16W R7003 NRSA63J-470X MG RESISTOR 47Ø,1/16W R7005 NRSA63J-333X MG RESISTOR 33kØ,1/16W C7001 NCB31CK-104X CAPACITOR 0.1µF,16V C7002 NCB31CK-104X CAPACITOR 0.1µF,16V C7003 NCB31CK-104X CAPACITOR 0.1µF,16V CN7001 QGF0517F2-20X FPC CONNECTOR CN7002 QGF0517F1-16X FPC CONNECTOR (Sanwa)-M2D7S8 5-21 GR-DVP7U...
  • Page 59: Notes Of Schematic Diagram

    SECTION 4 CIRCUIT BOARD NOTES CHARTS AND DIAGRAMS 1. Foil and Component sides 1) Foil side (B side) : NOTES OF SCHEMATIC DIAGRAM 4. Voltage measurement Parts on the foil side seen from foil face (pattern face) 1) Regulator (DC/DC CONV) circuits are indicated.
  • Page 60: Board Interconnections

    BOARD INTERCONNECTIONS ∗ YTU94074-16 YTU94077-16 ∗ NOTE ) : The number of patch cords are indicated by interconnected. LCD MODULE ∗ YTU94074-24 OP MDA YTU94077-24 OP BLOCK CN204 CN7002 MAIN CN202 (Page 4-49) VF BL (Page 4-50) CN7001 MIC UNIT (VIDEO/MEMO) (FOCUS) (EXP)
  • Page 61: Syscon-Cpu Schematic Diagram

    SYSCON-CPU SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. 0 1 MAIN (SYSCON-CPU) TO SERVO SRV_RST...
  • Page 62: Servo Schematic Diagram

    NOTES : For the destination of each signal and further line connections that are cut off from SERVO SCHEMATIC DIAGRAM this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. 0 1 MAIN (SERVO) L1401 TO REG...
  • Page 63: Mda Schematic Diagram

    NOTES : For the destination of each signal and further line connections that are cut off from MDA SCHEMATIC DIAGRAM this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. 0 1 MAIN (MDA) TO SERVO LD_REV...
  • Page 64: Audio Ad/Da Schematic Diagram

    AUDIO AD/DA SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN AUDIO EM_AU/R EM_AU/L...
  • Page 65: Main Audio Schematic Diagram

    NOTES : For the destination of each signal and further line connections that are cut off from MAIN AUDIO SCHEMATIC DIAGRAM this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. 0 1 MAIN (MAIN AUDIO) ∗...
  • Page 66: Dv Main Schematic Diagram

    DV MAIN SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. C3047 MAIN (DV MAIN) C3041...
  • Page 67: Pre/Rec Schematic Diagram

    PRE/REC SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN (PRE/REC) TO SERVO...
  • Page 68: Video I/O Schematic Diagram

    VIDEO I/O SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN (VIDEO I/O) L3701...
  • Page 69: Cds/Ad Schematic Diagram

    4.10 CDS/AD SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN (CDS/AD) TO TG/VDR IC4202...
  • Page 70: Cam.dsp Schematic Diagram

    4.11 CAM.DSP SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. 0 1 MAIN (CAM.DSP) L4304 NQR0129-002X...
  • Page 71: Tg/Vdr Schematic Diagram

    4.12 TG/VDR SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. ( TG/VDR ) 0 1 MAIN SYSCON-CPU...
  • Page 72: Regcon Schematic Diagram

    4.13 REGCON SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. TO WBSEN/SW CN201 0 1 MAIN (REGCON) TO REG...
  • Page 73: Reg Schematic Diagram

    4.14 REG SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN (REG) TO SYSCON-CPU, SERVO, AUDIO AD/DA, MAIN AUDIO,DV MAIN, PRE/REC, VIDEO I/O,...
  • Page 74: Vf Main Schematic Diagram

    4.15 VF MAIN SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. 0 1 MAIN (VF MAIN) TO REGCON CN110...
  • Page 75: Monitor Main Schematic Diagram

    4.16 MONITOR MAIN SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. 0 1 MAIN (MONITOR MAIN) L7204 TO REG...
  • Page 76: Dsc Schematic Diagram

    4.17 DSC SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN (DSC) TO AUDIO AD/DA 44.1KHZ...
  • Page 77: Usbdrv Schematic Diagram

    4.18 USBDRV SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. 0 1 MAIN [USBDRV] TO DSC C8308...
  • Page 78: Sd Schematic Diagram

    4.19 SD SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. 0 1 MAIN (SD) L8501 NQR0129-002X...
  • Page 79: Wbsen/Sw Schematic Diagram

    NOTES : For the destination of each signal and further line connections that are cut off from 4.20 WBSEN/SW SCHEMATIC DIAGRAM this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. TO MAIN CN110 TO CN203 TO OPDRV...
  • Page 80: Opdrv Schematic Diagram

    4.21 OPDRV SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. 0 2 OP MDA (OPDRV) L4802 10µ...
  • Page 81: Bottom Schematic Diagram

    4.22 BOTTOM SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. TO REGCON CN107 ∗...
  • Page 82: Monitor Schematic Diagram

    4.23 MONITOR SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. TO MONITOR MAIN 0 4 MONITOR CN113...
  • Page 83: W/B And Ccd Schematic Diagrams

    4.24 W/B AND CCD SCHEMATIC DIAGRAMS 4.25 EJECT AND VF BL SCHEMATIC DIAGRAMS NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". NOTES : For the destination of each signal and further line connections that are cut off from When ordering parts , be sure to order according to the Part Number indicated in the Parts List.
  • Page 84: Main Circuit Board

    4.26 MAIN CIRCUIT BOARD FOIL SIDE(B) 0 1 MAIN PWB YB10370-01-02 R1408 R1020 C6008 R1072 R1061 X1001 C1411 RA1401 R1021 R1035 R6009 R1085 R1036 R1025 Q1002 R1015 R1054 R1077 C1037 R1037 R1051 C1031 IC1101 D1001 R1052 C3902 R1056 R1066 R1801 C1801 R1055 R1022...
  • Page 85 COMPONENT PARTS LOCATION GUIDE <MAIN/YB10370-01-02> (1/2) REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION CAPACITOR C2112 C3036 C3746 C5028 C7207 CN115 IC8301 C2113 C3037 C3747 C6001 C7208 CN601 IC8302 C1003 C2114 C3038 C3801 C6002 C7209...
  • Page 86 COMPONENT PARTS LOCATION GUIDE <MAIN/YB10370-01-02> (2/2) REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION Q1004 R1050 R2107 R3017 R3738 R6120 R8004 TL1413 Q1006 R1051 R2108 R3018 R3739 R6121 R8005 TL1414 Q1007 R1052 R2109 R3019 R3740...
  • Page 87 COMPONENT SIDE(A) CAUTION: ATTENTION: FOR CONTINUED PROTECTION AGAINST POUR UNE PROTECTION PERMANENTE FIRE HAZARD ,REPLACE ONLY WITH SAME CONTRE LES RISQUE D'INCENDE, TYPE AND RATED FUSE(S). REMPLACER LES FUSIBLES PAR UN AUTRE DE MEME TYPE ET DE MEME TENSION. 0 1 MAIN PWB YB10370-01-02 IC1801 CN601...
  • Page 88: Op Mda Circuit Board

    4.27 OP MDA CIRCUIT BOARD FOIL SIDE(B) COMPONENT SIDE(A) R2919 R2907 D2901 D2903 D2902 Q2902 L2901 L2910 L2909 Q2901 CN202 C2904 0 2 OP MDA PWB 0 2 OP MDA PWB YB10371 YB10371 R4807 CN204 R4823 C4809 R4828 R4826 C4804 R4831 R4816 R4822...
  • Page 89: Bottom Circuit Board

    4.28 BOTTOM CIRCUIT BOARD FOIL SIDE(B) COMPONENT SIDE(A) L2852 L2851 L2853 L2854 0 3 BOTTOM PWB 0 3 BOTTOM PWB YB10372-01-01 YB10372-01-01 R2801 L2859 R2805 L2858 R2802 R2807 L2857 TL2801 R2806 D2801 D2806 CN303 R2813 D2805 R2812 R2810 D2802 D2804 L2801 R2803 R2808...
  • Page 90: Monitor, Ccd, Eject And Vf Bl Circuit Boards

    4.29 MONITOR, CCD, EJECT AND VF BL CIRCUIT BOARDS - CCD - FOIL SIDE(B) COMPONENT SIDE(A) - MONITOR - 0 5 CCD PWB 0 5 CCD PWB FOIL SIDE(B) COMPONENT SIDE(A) YB20926 YB20926 0 4 MONITOR PWB 0 4 MONITOR PWB YB20933 YB20933 C5204...
  • Page 91: Voltage Charts

    4.30 VOLTAGE CHARTS <SYSCON-CPU> MODE MODE MODE MODE MODE MODE MODE MODE MODE MODE PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO.
  • Page 92 <CCD> <REGCON> MODE MODE MODE MODE MODE MODE MODE MODE MODE MODE MODE PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO.
  • Page 93: Power System Block Diagram

    4.31 POWER SYSTEM BLOCK DIAGRAM TG/VDR MAIN CDS/AD OP BLOCK IC4202 CN111 CN5201 REG_4.8V REG 15V CCD-7.5V CCD-7.5V 3.1V REG REG-CCD CCD 15V CCD 15V IC5201 IC5003 DET(2) IC5001 REG_4.8V 3.3V REG CCD 15V CCD 15V BATT. IC4201 REG 3V TERMINAL -(1) IC5002...
  • Page 94: Video System Block Diagram

    OP MDA BOTTOM A(0~19) VF BL IC8003 J302 CN110 CN201 CN203 CN7001 CN7002 (FLASH MEMORY) CVF_R D(00~15) IC7101 CVF_G (RGB SIGNAL USB_DP CN301 CN107 USB_DN PROCESS) S_DT_OUT CVF_B IC8301 48, 47 (USB) USBSENS LCD MODULE (CVF) 4-69 4-70 (Sanwa)-M2D7S8 GR-DVP7U...

Table of Contents