Dubbing Still Images Recorded On A Tape To A Memory Card - JVC GR-DVP3 Instructions Manual

60
EN
SET/SELCT
Button
Play/Pause
Button (4/6)
Power Switch
Lock Button
Display
COPY – OF F
ON
VIDEO/MEMORY
Switch
MENU Button
+, – Button
SNAPSHOT Button
VIDEO Menu
6
SP
Dubbing Still Images Recorded On A Tape
To A Memory Card
Still images can be dubbed from a tape to a memory
card.
1
Load a memory card (
( pg. 14).
2
Select the Snapshot mode in the Menu Screen
( pg. 28) to use for dubbing the image to the
memory card.
3
Set the VIDEO/MEMORY Switch to "VIDEO", then
set the Power Switch to "
the Lock Button located on the switch.
4
Press MENU. The Menu Screen appears. Press + or –
to select " VIDEO" and press SET/SELECT. The
VIDEO Menu appears.
5
Press + or – to select "
SET/SELECT. The Sub Menu appears. Press + or – to
select "ON" and press SET/SELECT. Selection is
complete.
6
Press + or – to select " RETURN" and press SET/
SELECT twice. The normal playback screen resumes.
7
To select a still image to be dubbed, start playback
by pressing 4/6. At the moment you find the
image you wish to dub, press it again to engage Still
Playback.
8
To start dubbing, press SNAPSHOT. The selected
image is stored in the memory card.
•" " blinks during dubbing.
NOTES:
If SNAPSHOT is pressed in step 8 when a memory card
is not loaded, the message "COPYING FAILED" is
displayed.
If an image recorded on the tape using the WIDE mode
( pg. 42) is dubbed to a memory card, the WIDE
mode identifying signal is not dubbed with it.
To use Playback Special Effects with a video image you
wish to dub, perform up to step 8 using the remote
control (provided) (
Images are dubbed in VGA file size.
DUBBING
pg. 16) and cassette
" while pressing down
COPY" and press
pg. 65).
(cont.)