Initializing A Memory Card; Video/Memory Switch; Video/Memory - JVC GR-DVP3 Instructions Manual

38
EN
SET/SELECT
Button
Display
PROTEC T
DELE E T
DPOF
FORM AT CANCEL
EXECUTE
RETUR N
FO MAT R
FO MAT R – CANCEL
EXECUTE
ERASE AL L
EX ST I NG I F I LE ?

VIDEO/MEMORY

Switch
Power Switch
Lock Button
MENU Button
+, – Button
MEMORY Menu
Confirmation
Screen
S
D.S.C. PLAYBACK

Initializing A Memory Card

You can initialize a memory card anytime.
After initializing, all files and data stored in the memory
card, including those which have been protected, are
cleared.
1
Set the VIDEO/MEMORY Switch to "MEMORY",
then set the Power Switch to "
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder
fully.
2
Press MENU. The Menu Screen appears.
3
Press + or – to select "
SELECT. The MEMORY Menu appears.
4
Press + or – to select "FORMAT" and press SET/
SELECT. The Confirmation Screen appears.
5
Press + or – to select "EXECUTE" and press SET/
SELECT. The memory card is initialized. When
initialization is finished, "NO FILES STORED" or
"NO SOUND FILES" appears.
•To cancel initialization, press + or – to select
"CANCEL" and press SET/SELECT.
CAUTION:
Do not perform any other operation (such as turning
off the camcorder) during initialization. Also, be sure
to use the provided AC Power Adapter/Charger, as the
memory card may be corrupted if the battery becomes
exhausted during initialization. If the memory card
becomes corrupted initialize it.
(cont.)
" while pressing
MEMORY" and press SET/