Set/Select Button - JVC GR-DVP3 Instructions Manual

MENU Button
SET/SELECT
Button
Number of prints
Display
EXIT DPOF
100-DVC00021 VGA
1 9 0 0 2 0 0 0 2 1
2 2 0 0 2 3 0 0 2 4
DPOF
SE ECT L – CANCEL
EXECUTE
VIDEO/MEMORY
Switch
Power Switch
Lock Button
+, – Button
DPOF Index
Screen
0 3
0 0
Confirmation
Screen
TO PRINT BY SELECTING STILL IMAGES
AND NO. OF PRINTS
1
Perform steps 1 through 4 on pg. 36.
2
Press + or – to selsect "SELECT" and press SET/
SELECT. Selection is complete. The DPOF Index
Screen appears.
3
Press + or – to move the green frame to the image
you wish to print and press SET/SELECT.
4
Select the number of prints by pressing + to increase
the number, or – to decrease the number and press
SET/SELECT.
Repeat steps 3 and 4 for the desired number of
prints.
•The number of prints can be set up to 15.
•To correct the number of prints, select the image
again and change the number.
5
Press + to select "EXIT" and press SET/SELECT.
Selection is complete. The Confirmation Screen
appears.
6
Press + or – to select "EXECUTE" and press SET/
SELECT. The normal playback screen appears.
•To cancel selection, press + or – to select "CAN-
CEL" and press SET/SELECT.
To Reset The No. Of Prints . . .
.... select "RESET" in step 5 on pg. 36. The number of
prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power,
as this may cause the memory to be corrupted.
NOTES:
If you load a memory card already set as shown above
in a printer compatible with DPOF, it will make prints
of the selected still images automatically.
To print images recorded on a tape, first dub them to a
memory card ( pg. 60).
37
EN