Power - JVC GR-DVP3 Instructions Manual

10
EN
CHARGE
indicator

POWER

indicator
DC OUT connector
Battery pack
BN-V107U
BN-V114U (optional)
NOTES:
If the protective cap is attached to the battery pack, remove it first.
If you connect the camcorder's DC cord to the adapter during battery charging, power is supplied to the
camcorder and charging stops.
When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may
not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.
If the battery operation time remains extremely short even after having been fully charged, the battery is
worn out and needs to be replaced. Please purchase a new one.
Lithium-ion is vulnerable in colder
temperatures.
Protruding part
Battery pack
To
AC outlet
AC Power
Adapter/Charger
Charging time
approx. 1 hr. 30 min.
approx. 2 hr.
GETTING STARTED
Power
This camcorder's 2-way power supply system lets you
choose the most appropriate source of power. Do not use
provided power supply units with other equipment.
CHARGING THE BATTERY PACK
1
Make sure you unplug the camcorder's DC cord from
the AC Power Adapter/Charger. Plug the AC Adapter/
Charger's power cord into an AC outlet. The POWER
indicator lights.
2
Attach the battery pack with the
with the corresponding marks on the AC Power
Adapter/Charger. The CHARGE Indicator begins
blinking to indicate charging has started.
3
When the CHARGE indicator stops blinking but stays
lit, charging is finished. Remove the battery by
pushing up the protruding part. Remember to unplug
the AC Adapter/Charger's power cord from the AC
outlet.
About Batteries
DANGER! Do not attempt to take the batteries apart, or
expose them to flame or excessive heat, as it may cause a fire
or explosion.
WARNING! Do not allow the battery or its terminals to come
in contact with metals, as this can result in a short circuit and
possibly start a fire.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a large power
capacity. However, when one is exposed to cold temperatures
(below 10°C/50°F), its usage time becomes shorter and it may
cease to function. If this happens, place the battery pack in
your pocket or other warm, protected place for a short time,
then re-attach it to the camcorder. As long as the battery pack
itself is not cold, it should not affect performance.
(If you're using a heating pad, make sure the battery pack does
not come in direct contact with it.)
For other notes,
(cont.)
mark aligned
pg. 77