Video Playback; Normal Playback; Still Playback; Shuttle Search - JVC GR-DVP3 Instructions Manual

VIDEO PLAYBACK

VOL. +/–
VIDEO/MEMORY
Switch
Speaker
Stop Button (5)

Still Playback:

Pauses during playback.
1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.
If still playback continues for more than about 3 minutes, the camcorder's Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the camcorder's power is automatically turned off.
When 4/6 is pressed, the image may not pause immediately while the camcorder stabilises the still image.

Shuttle Search:

Allows high-speed search in either direction.
1) During playback, turn the SHUTTLE SEARCH Ring to the right (3) for forward or to the left (2)
for reverse search.
2) To resume normal playback, press 4/6.
During playback, turn the SHUTTLE SEARCH Ring to the right ( 3 ) or to the left ( 2 ) and hold it.
The search continues as long as you hold the ring. Once you release it, normal playback resumes.
A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
Slow-Motion Playback, Frame-By-Frame Playback, Playback Zoom and
Playback Special Effects
Available only with the remote control (provided) (

Normal Playback

1
2
Play/Pause
Button (4/6)

Power Switch

To Control The Speaker Volume . . .
.... press VOL. + to turn up the volume, or – to turn
Lock Button
NOTES:
SHUTTLE SEARCH
Ring (2/3)
Load a tape ( pg. 14).
Set the VIDEO/MEMORY Switch to "VIDEO", then
set the Power Switch to "
the Lock Button located on the switch. To start
playback, press 4/6.
•To stop playback, press 5.
•Turn the SHUTTLE SEARCH Ring to the left (2)
to rewind, or to the right (3) to fast-forward the
tape during Stop mode.
down the volume.
If Stop mode continues for 5 minutes when power is supplied
from a battery, the camcorder shuts off automatically. To turn
on again, set the Power Switch to "OFF", then to "
The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (
You can also view the playback picture on the LCD monitor
with it flipped over and pushed against the camera body.
LCD monitor/viewfinder indications:
• When power is supplied from a battery: the "
battery pack remaining power indicator is displayed.
When power is supplied from an AC outlet: "
does not appear.
• During Stop mode, none of the indications are displayed.
When a cable is connected to the AV connector, the
sound is not heard from the speaker.
pg. 64, 65).
23
EN
" while pressing down
".
pg. 24, 25).
"
"