Making A New Folder; Setting Print Information (Dpof Setting) - JVC GR-DVX507 Instructions Manual

34
EN

Making A New Folder

New still pictures you are going to take can be
separated from previously shot pictures by resetting
the file name to DVC00001; these new pictures will
be stored in a new folder.
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to "MEMORY".
3
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
5
If the video clip playback (E-MAIL CLIP,
( pg. 29)) or the digital sound playback
(SOUND, ( pg. 29)) screen appears, press
SELECT. The MEMORY SELECT screen appears.
6
Rotate the MENU Wheel to select "IMAGE", and
press it. The image playback screen (IMAGE)
appears.
7
Press the MENU Wheel in. The Menu Screen
appears.
8
Rotate the MENU Wheel to select "NO. RESET",
and press it. The NO. RESET screen appears.
9
Rotate the MENU Wheel to select "EXECUTE",
and press it. The new folder (such as
"101JVCGR") will be made and the file made of
the next shot starts from DVC00001.
Folder and File names
Each time shooting takes place, a file name is made
using a number which is larger by one than the
largest number of the file names which are in use.
Even if you delete an image file with a number in the
middle of range, the number will not be used for a
new shot; a gap will remain in the numerical
sequence. If the file name reaches DVC09999, a
new folder (such as "101JVCGR") will be made and
the file name will start again from DVC00001.
pg. 17)
D.S.C. PLAYBACK (cont.)
Setting Print Information (DPOF
Setting)
This camcorder is compatible with the DPOF
(Digital Print Order Format) standard in order to
support future systems such as automatic printing.
You can select one of the 2 print information settings
for images stored in the memory card: "To Print All
Still Images (One Print For Each)" or "To Print By
Selecting Still Images And Number Of Prints".
NOTES:
● If you load a memory card already set as shown
below in a printer compatible with DPOF, it will
make prints of the selected still images
automatically.
● To print images recorded on a tape, first dub them
to a memory card. (
To Print All Still Images (One Print For Each)
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to "MEMORY".
3
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
5
If the video clip playback (E-MAIL CLIP,
( pg. 29)) or the digital sound playback
(SOUND, ( pg. 29)) screen appears, press
SELECT. The MEMORY SELECT screen appears.
6
Rotate the MENU Wheel to select "IMAGE", and
press it. The image playback screen (IMAGE)
appears.
7
Press the MENU Wheel in. The Menu Screen
appears.
8
Rotate the MENU
Wheel to select
"DPOF", and press it.
The Sub Menu
appears.
9
Rotate the MENU
Wheel to select
"ALL 1", and press it.
The DPOF screen appears.
pg. 65)
pg. 17)
M E NU
DPOF CUR RENT
AL L 1
RESET
RETURN